您似乎禁用了您浏览器中的JavaScript功能。本网页上的某些功能需要登录后才能使用。

MPQ7220GF-AEC1-P

Name: Monolithic Power Systems (MPS) MPQ7220GF-AEC1-P
Brand: Monolithic Power Systems (MPS)
SKU: 946-MPQ7220GF-AEC1-P
Price: 19.47 RMB
Availability: OutOfStock

Mouser编号：

946-MPQ7220GF-AEC1-P

制造商编号：

MPQ7220GF-AEC1-P

制造商：

Monolithic Power Systems (MPS)

说明：

LED照明驱动器IC 6-Channel, Max 100mA/Ch Boost LED Driver, AEC-Q100 Qualified

数据表:

MPQ7220GF-AEC1-P 数据表

ECAD模型:

下载免费库加载程序，将此文件转换，以供您的ECAD工具使用。了解详情。

更多信息

了解Monolithic Power Systems (MPS) MPQ7220GF-AEC1-P详情

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

产品属性	属性值	选择属性
制造商:	Monolithic Power Systems (MPS)
产品种类:	LED照明驱动器IC
RoHS:
输出端数量:	6 Output
拓扑结构:	Boost
输出电流:	100 mA
电源电压-最大:	36 V
电源电压-最小:	3.5 V
工作频率:	400 kHz to 2.2 MHz
输出电压:	Adjustable
最小工作温度:	- 40 C
最大工作温度:	+ 125 C
资格:	AEC-Q100
封装:	Reel
商标:	Monolithic Power Systems (MPS)
特点:	PWM Dimming, Short Circuit and Thermal Protection
输入电压:	3.5 V to 36 V
湿度敏感性:	Yes
安装风格:	SMD/SMT
通道数量:	6 Channel
产品:	LED Lighting Drivers
产品类型:	LED Lighting Drivers
工厂包装数量:	500
子类别:	Driver ICs
电源电流—最大值:	5 mA

找到的产品:

要显示类似产品，至少选中一个复选框

要显示该类别下的类似产品，请至少选中上方的一个复选框。

已选择的属性: 0

筛选文档:

数据表

MPQ7220GF-AEC1-P 数据表

合规代码

CAHTS:: 8542390000
USHTS:: 8542390090
TARIC:: 8542399000
MXHTS:: 8542399999
ECCN:: EAR99

原产地分类

原产国:: 中国
组装原产国/地区:: 不可用
扩散国家:: 不可用

发货时，国家/地区可能会发生变化。

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

MPQ7220-AEC1 LED Lighting Drivers

Monolithic Power Systems (MPS) MPQ7220-AEC1 LED Lighting Drivers are boost converters with six-channel current sources that are designed for driving automotive tail lights. These LED drivers use peak current mode as their PWM control architecture and the switching frequency can be programmed by a resistor. The MPQ7220-AEC1 LED lighting drivers independently regulate the current in each LED string to the value set by an external current setting resistor. These drivers apply six internal current sources with one in each LED string terminal to achieve a current balance with 2.5% current regulation accuracy between strings. The low headroom voltage for the LED regulation and on-resistance of switching MOSFETs allow for high efficiency. These LED lighting drivers protection modes include Over-Current Protection (OCP), Over-Voltage Protection (OVP), Over-Temperature Protection (OTP), and LED string short and open protection. The MPQ7220-AEC1 LED lighting drivers operate at a 3.5V to 36V input voltage range and 40°C to 125°C temperature range.