ASL2507SHNY

NXP Semiconductors
771-ASL2507SHNY
ASL2507SHNY

制造商:

说明:
LED照明驱动器IC Dual phase boost converter IC, Automotive grade, SPI, Limp Home mode

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 4,741

库存:
4,741 可立即发货
生产周期:
16 周 大于所示数量的预计工厂生产时间。
数量大于4741的订购须受最低订购要求的限制。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
¥32.3406 ¥32.34
¥21.4248 ¥214.25
¥19.5264 ¥488.16
¥16.5432 ¥1,654.32
¥15.7183 ¥3,929.58
¥14.3058 ¥7,152.90
¥13.3227 ¥13,322.70
¥12.9046 ¥32,261.50
整卷卷轴(请按6000的倍数订购)
¥12.5769 ¥75,461.40

产品属性 属性值 选择属性
NXP
产品种类: LED照明驱动器IC
RoHS:  
2 Output
Boost
HVQFN-32
40 V
5.5 V
125 kHz to 700 kHz
Adjustable
ASL2507SHN
- 40 C
+ 125 C
Thermal Shutdown
Reel
Cut Tape
商标: NXP Semiconductors
输入电压: 5.5 V to 40 V
湿度敏感性: Yes
安装风格: SMD/SMT
通道数量: 2 Channel
产品: LED Lighting Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 6000
子类别: Driver ICs
电源电流—最大值: 250 uA
类型: 2 Phase
零件号别名: 935307371518
单位重量: 191.194 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542399000
USHTS:
8542390090
TARIC:
8542399000
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

ASLx507直流-直流升压转换器

NXP Semiconductors ASLx507直流-直流升压转换器包括单相和双相IC,具有可编程limp-home模式特性。这些升压转换器IC设有一个或两个集成栅极驱动器,可驱动外部功率MOSFET和集成的比例积分 (PI) 控制器。ASLx507升压转换器设有SPI接口,可对外部微控制器进行全面控制并与其进行诊断通信。如果与微控制器的SPI通信失败,这些升压转换器支持在limp-home模式下进行可配置操作。ASLx507 IC的输出根据存储在非易失性存储器 (NVM) 中的预定义条件运行,该非易失性存储器可由客户在limp-home模式下进行编程。