LED6000PHR

STMicroelectronics
511-LED6000PHR
LED6000PHR

制造商:

说明:
LED照明驱动器IC 3 A, 61 V monolithic current source with dimming capability

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 418

库存:
418 可立即发货
生产周期:
24 周 大于所示数量的预计工厂生产时间。
数量大于418的订购须受最低订购要求的限制。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
¥30.6908 ¥30.69
¥23.165 ¥231.65
¥19.2778 ¥481.95
¥18.4416 ¥1,844.16
¥18.0348 ¥4,508.70
¥17.5376 ¥8,768.80
¥16.8709 ¥16,870.90
¥15.7183 ¥30,179.14

备用包装

制造商零件编号:
包装:
Reel, Cut Tape
供货情况:
库存量
单价:
¥30.6908
最小:
1

产品属性 属性值 选择属性
STMicroelectronics
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Buck
3 A
HTSSOP-16
61 V
4.5 V
250 kHz to 1.5 MHz
Adjustable
LED6000
- 40 C
+ 150 C
Soft Start
Tube
商标: STMicroelectronics
调光: PWM
输入电压: 4.5 V to 61 V
湿度敏感性: Yes
安装风格: SMD/SMT
通道数量: 1 Channel
输出类型: Constant Current
产品: LED Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 1920
子类别: Driver ICs
电源电流—最大值: 3.4 mA
类型: Buck Current Regulators for LED
单位重量: 62.700 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

LED6000单片式降压型开关稳压器

STMicroelectronics LED6000单片式降压型开关稳压器设计用于为大功率LED驱动提供高达3A的直流电流。250mV典型RSENSE电压降提高了效率。通过驱动专用DIM引脚实现数字调光。可调电流限制设计用于根据标称输出LED电流选择电感器RMS,另外,开关频率的的可调性有助于实现紧凑的应用尺寸。VBIAS的嵌入式切换功能可最大限度地提高效率。可以通过共享SYNCH引脚来同步多个器件,以防止低噪声应用中的抖动噪声,并减少输入电流RMS值。该器件具有全面的过热、过流和输出短路保护。LED6000采用HTSSOP16裸露焊盘封装。