NSI45015WT1G

onsemi
863-NSI45015WT1G
NSI45015WT1G

制造商：

说明：
LED照明驱动器IC 45V

数据表:
ECAD模型:
下载免费库加载程序，将此文件转换，以供您的ECAD工具使用。了解详情。
更多信息
了解onsemi NSI45015WT1G详情

库存量: 183,395

库存：
183,395 可立即发货
生产周期：
31 周 大于所示数量的预计工厂生产时间。
最少： 1   倍数： 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴（请按3000的倍数订购）

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™ †
¥2.0679 ¥2.07
¥1.4238 ¥14.24
¥1.2656 ¥31.64
¥1.08367 ¥108.37
¥1.00118 ¥250.30
¥0.94242 ¥471.21
¥0.90174 ¥901.74
整卷卷轴（请按3000的倍数订购）
¥0.81925 ¥2,457.75
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。 ↩

产品属性 属性值 选择属性
onsemi
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Boost, Buck
15 mA
SOD-123
45 V
45 V
1 MHz
Adjustable
NSI45015W
- 55 C
+ 150 C
Constant Current
Reel
Cut Tape
MouseReel
商标: onsemi
高电平输出电流: 18 mA
输入电压: 45 V
低电平输出电流: 12 mA
安装风格: SMD/SMT
通道数量: 1 Channel
Pd-功率耗散: 208 mW
产品类型: LED Lighting Drivers
工厂包装数量: 3000
子类别: Driver ICs
电源电流—最大值: 18 mA
单位重量: 30 mg
找到的产品:
要显示类似产品，至少选中一个复选框
要显示该类别下的类似产品，请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542399000
CAHTS:
8541100090
USHTS:
8541100070
KRHTS:
8541109000
TARIC:
8541100000
MXHTS:
8541100101
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

汽车IVN和照明解决方案

安森美半导体提供的节能型汽车解决方案可减少排放、改善燃油经济性，并增强照明、安全、连接和信息娱乐供电系统。

NSI45015 Constant Current Regulator & LED Driver

onsemi NSI45015 Constant Current Regulator (CCR) & LED Driver is a simple, economical and robust device designed to provide a cost−effective solution for regulating current in LEDs (similar to Constant Current Diode, CCD). The CCR is based on Self-Biased Transistor (SBT) technology and regulates current over a wide voltage range. It is designed with a negative temperature coefficient to protect LEDs from thermal runaway at extreme voltages and currents. The CCR turns on immediately and is at 35% of regulation with only 0.5V Vak. onsemi NSI 45015 requires no external components allowing it to be designed as a high or low−side regulator. The high anode-cathode voltage rating withstands surges common in Automotive, Industrial and Commercial Signage applications. The CCR comes in thermally robust packages and is qualified to AEC-Q101 standard, and UL94−V0 certified.

出现意外错误。


有问题吗？ 请访问帮助中心。
有关特定订单的问题，请登录您的账户。

如果您遇到其他问题，请致电800-346-6873联系我们，或发送电子邮件至 help@mouser.com 。