NCL30060BDR2G

onsemi
863-NCL30060BDR2G
NCL30060BDR2G

制造商：

说明：
LED照明驱动器IC LED DRIVER

数据表:
ECAD模型:
下载免费库加载程序，将此文件转换，以供您的ECAD工具使用。了解详情。
更多信息
了解onsemi NCL30060BDR2G详情

供货情况

库存：
无库存
生产周期：
27 周 预计工厂生产时间。
本产品所报告的交付时间长。
最少： 2500   倍数： 2500
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
整卷卷轴（请按2500的倍数订购）
¥4.9607 ¥12,401.75

产品属性 属性值 选择属性
onsemi
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Flyback
400 mA
SOIC-7
11.5 V
11.5 V
60 kHz
Adjustable
NCL30060
- 40 C
+ 105 C
Overvoltage Protection
Reel
商标: onsemi
输入电压: 11.5 V
安装风格: SMD/SMT
通道数量: 1 Channel
产品: LED Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 2500
子类别: Driver ICs
电源电流—最大值: 1.7 mA
类型: Power Factor Controller (PFC)
单位重量: 254 mg
找到的产品:
要显示类似产品，至少选中一个复选框
要显示该类别下的类似产品，请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542399000
USHTS:
8542390090
TARIC:
8542399000
ECCN:
EAR99

NCL30060 Offline Single Stage LED Drivers

onsemi NCL30060 Offline Single Stage LED Drivers are a switch mode power supply controller intended for low to medium power single-stage Power Factor (PF) corrected LED Drivers. It employs a constant on−time control method to ensure near unity power factor across a wide range of input voltages and output power. It can be used for isolated flyback as well as buck topologies. onsemi NCL30060 Offline Single Stage LED Drivers offer a suite of robust protection features to ensure safe operation under a range of fault conditions.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

出现意外错误。


有问题吗？ 请访问帮助中心。
有关特定订单的问题，请登录您的账户。

如果您遇到其他问题，请致电800-346-6873联系我们，或发送电子邮件至 help@mouser.com 。