ALED1642GWXTTR

STMicroelectronics
511-ALED1642GWXTTR
ALED1642GWXTTR

制造商:

说明:
LED照明驱动器IC 16 Channels LED driver with error detection, current gain control and 12/16 bit-

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 1,449

库存:
1,449 可立即发货
生产周期:
24 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴(请按2500的倍数订购)

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™
¥16.4641 ¥16.46
¥12.1588 ¥121.59
¥11.0853 ¥277.13
¥9.9214 ¥992.14
¥9.3451 ¥2,336.28
¥9.0174 ¥4,508.70
¥8.9383 ¥8,938.30
整卷卷轴(请按2500的倍数订购)
¥8.3507 ¥20,876.75
¥8.1925 ¥40,962.50
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。

产品属性 属性值 选择属性
STMicroelectronics
产品种类: LED照明驱动器IC
RoHS:  
16 Output
Buck
40 mA
TSSOP-24
5.5 V
3 V
30 MHz
19 V
ALED1642GW
- 40 C
+ 150 C
PWM Dimming, Constant Current
AEC-Q100
Reel
Cut Tape
MouseReel
商标: STMicroelectronics
输入电压: 3 V to 5.5 V
湿度敏感性: Yes
安装风格: SMD/SMT
通道数量: 16 Channel
产品: PWM LED Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 2500
子类别: Driver ICs
电源电流—最大值: 10 mA
单位重量: 212 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

ALED1642GW LED 显示驱动器

STMicroelectronics ALED1642GW LED 显示驱动器是单片低压低电流 16 位移位寄存器,用于 LED 面板显示屏。ALED1642GW 可确保 20V 的输出驱动能力,用户可以以串联方式连接若干个 LED。在输出阶段,16 个稳压电流源提供从 3mA 到 40mA 的恒定电流以驱动 LED。电流通过外部电阻器进行设定,并可以由一个 7 位电流增益寄存器在两个子范围间进行调整。各通道亮度可通过 12/16 位灰阶控制分别进行调整。可编程的开关时间(有四个不同值可用)改善了系统低噪声发生性能。
了解更多