MP4088GN-Z

Monolithic Power Systems (MPS)
946-MP4088GN-Z
MP4088GN-Z

制造商:

说明:
LED照明驱动器IC Non-Iso Hi PFC TRIAC Dimmable LED Driver

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

供货情况

库存:
无库存
生产周期:
18 周 预计工厂生产时间。
最少: 2500   倍数: 2500
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
整卷卷轴(请按2500的倍数订购)
¥3.6273 ¥9,068.25
¥3.4804 ¥26,103.00

产品属性 属性值 选择属性
Monolithic Power Systems (MPS)
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Buck-Boost, Flyback
SOIC-EP-8
5 V
4.5 V
MP4088
Brightness Control/Dimming
Reel
商标: Monolithic Power Systems (MPS)
组装国: Not Available
扩散国家: Not Available
原产国: Not Available
调光: Triac
输入电压: 4.5 V to 5 V
湿度敏感性: Yes
安装风格: SMD/SMT
通道数量: 1 Channel
Pd-功率耗散: 2.6 W
产品: LED Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 2500
子类别: Driver ICs
电源电流—最大值: 6.1 mA
类型: Non-Isolated
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542390000
CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

MP4088 TRIAC Dimmable LED Driver

MPS MP4088 TRIAC (Triode Alternating Current) Dimmable LED Driver is designed for high-line input (230VAC).This MP4088 is non-isolated and has up to 10W LED driver. The MP4088 start up quickly without any delay with an internal high voltage regulator. This MP4088 is designed with integrated 500V MOSFET, single winding indicator, and supports buck and buck-boost topology. The MP4088 is available with protection features including VCC under-voltage lockout, over-voltage protection, and short-circuit protection. These features are ideal for simple, offline, and non-isolated TRIAC dimmable LED lighting applications.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.