Microchip Technology SMART SAM D09 ARM-Cortex-M0+ MCU

Microchip SMART™ SAM D09 ARM^®-Cortex^®-M0+ MCU 为小型精简功能集 ARM Cortex-M0+ MCU。 SAM D09 MCU 设计用于在 SAM D 系列中的器件之间进行简单的代码迁移。他们与 SAM D10 系列引脚兼容。这可轻松迁移到具有额外功能的较大器件中。 SAM D09 设备可在 48MHz 最大频率下运行。他们采用 14 至 24 引脚封装，具有高达 16KB 闪存和 4KB SRAM。所有器件包含 Microchip 事件系统，用于外设之间的信号传输以及为电容式触控接口提供支持。

特性

Processor
- ARM Cortex-M0+ CPU running at up to 48MHz
  - Single-cycle hardware multiplier
  - Micro Trace Buffer
Memories
- 8/16KB in-system self-programmable
- Flash 4KB SRAM Memory
System
- Power-on reset (POR) and brown-out detection (BOD)
- Internal and external clock options with 48MHz Digital Frequency Locked Loop (DFLL48M) and 48MHz to 96MHz Fractional Digital Phase Locked Loop (FDPLL96M)
- External Interrupt Controller (EIC)
- 8 external interrupts
- One non-maskable interrupt
- Two-pin Serial Wire Debug (SWD) programming, test, and debugging interface
Low Power and I/O
- Idle and standby sleep modes SleepWalking peripherals
- Up to 22 programmable I/O pins
Packages
- 24-pin QFN
- 14-pin SOIC
Operating Voltage
- 2.4V to 3.63V

Peripherals
- 6-channel Direct Memory
- Access Controller (DMAC)
- 6-channel Event System
- Two 16-bit Timer/Counters (TC), configurable as either:
  - One 16-bit TC with compare/capture channels
  - One 8-bit TC with compare/capture channels
  - One 32-bit TC with compare/capture channels, by using two TCs
- 32-bit Real Time Counter (RTC) with clock/calendar function
- Watchdog Timer (WDT)
- CRC-32 generator
- Two Serial Communication Interfaces (SERCOM), each configurable to operate as either:
  - USART with full-duplex and single-wire half-duplex configuration
  - I²C Bus
  - SMBUS/PMBUS
  - SPI
  - LIN slave
- 12-bit, 350ksps Analog-to-Digital Converter (ADC) with up to 10 channels
  - Differential and single-ended input
  - 1/2x to 16x programmable gain stage
  - Automatic offset and gain error compensation
  - Oversampling and decimation in hardware to support 13-, 14-, 15- or 16-bit resolution