Murata Power Solutions SPM15 隔离型直流-直流转换器
Murata SPM15 系列隔离型直流-直流转换器是采用工业密封模块技术的最新一代产品。SPM15 系列隔离型直流-直流转换器在一平方英寸的电路板面积上提供满幅 15 瓦的输出，为印刷电路板贴装提供了有效的稳压直流电源。这款 1" x 1" x 0.41" (25.4 x 25.4 x 10.41 mm) 的转换器接受宽幅输入电压范围，是工业应用的理想选择。预定目标市场包括交通运输、医疗设备、电子检测设备、工业处理设备，以及电源模块必须满足严酷环境要求、大功率密度的工业应用和要求隔离式输出电压的工业应用。这些转换器的特性/选择包括：通孔式安装、正或负逻辑（远程开/关）、过流&超温保护、欠压锁定。输入电压范围满足行业标准要求，具有稳定输出电压，额定功率高达 15W。模块提供从输入到高达 1600V 输出的电压隔离（基本绝缘）。工作环境温度范围为 -40°C 到 +85°C。在 +70°C，无气流情况下模块输出满功率。这些元件是无需散热器或强制空气冷却应用的理想之选。
Murata Power Solutions SPM15 DC-DC converters are ideal for industrial applications, including transportation, medical systems, electronic test equipment, and industrial processing equipment. They are also well suited for industrial applications where power modules must meet rugged environmental requirements, high power density, and where isolated output voltages are required.
特性
- 9VDC to 36VDC and 18VDC to 75VDC wide input voltage ranges
- Measures 25.4mm2 x 10.41mm (1"2 x 0.41")
- Adjustable Vout (±10%)
- 1600V I/O isolation
- High efficiency
- Low output ripple and noise
- Strong thermal derating characteristics
- -40°C to +85°C operating temperature range
- Positive or negative logic (remote on/off)
- Monotonic startup into pre-bias output conditions
- Continuous short circuit protection
- Overtemperature and overvoltage protection
- Packaged in a five-sided EMI shielding metal package with a non-conductive base
- Certified to UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC60950-1, safety approvals, 2nd edition, with AM1
应用
- Industrial applications where power modules must meet rugged environmental requirements, high power density, and where isolated output voltages are required
- Transportation
- Medical systems
- Electronic test equipment
- Industrial processing equipment
Connection Diagram
发布日期: 2014-01-14
| 更新日期: 2025-12-12