所有结果 (583)

加速传感器模块 Side exit, low frequency (0.2 Hz), IsoRing, case isolated, MIL-C-5015 connector, 500 mV/g, +/-5% sensitivity tolerance

振动传感器 Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, RMS, 2.0 ips (50.8 mm/sec), MIL-C-5015 connector.

振动传感器 Top exit, 105 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, Equivalent Peak, 50 g (490 m/sec2), 1/4-28 mounting hole (stud included), MIL-C-5015 connector. )

传感器电缆/致动器电缆 MIL-C-5015, 2 socket, IP 68, high temperature (200 degrees C), isolated, blunt cut, twisted pair, braided shield, yellow, Teflon jacket, 32 ft.

振动传感器 Top exit, 85 C, 4-20 mA ( 5% @ full scale) proportional to Acceleration, True Peak (85 C limited), 20 g (196 m/sec2), MIL-C-5015 connector.

多芯电缆 J9T2A-500 = 500 ft roll

加速传感器模块 Top exit, general purpose, case isolated, 100 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector, Class I Div 1 certified intrinsically safe

加速传感器模块 Top exit, isolated sensor with extended EMI performance, 4 pin M12 connector, M8 integral mounting stud, 100 mV/g, +/-5% sensitivity tolerance

加速传感器模块 Top exit, case isolated, MIL-C-5015 connector, 100 mV/g, +/-5% sensitivity tolerance

加速传感器模块 Side exit, low noise floor, microdot connector, high sensitivity, case grounded, 500 mV/g, +/-5% sensitivity tolerance

传感器硬件与配件 Spot face tool, 1.25 diameter w/ integral pilot drill for 1/4-28 hole, adjustable drill depth

信号调节 Factory configured vibration transmitter, IEPE sensor input, 2 x 4-20 mA outputs, supports single and dual output sensors; configuration details: acceleration input, 100 mV/g accelerometer sensitivity, true RMS, velocity output, 2 ips full scale, 10-