所有结果 (1,945)

Raspberry Pi HAT/附加板 SparkFun Qwiic HAT for Raspberry Pi

界面开发工具 The SparkFun Serial Basic Breakout - USB-C is the latest evolution of our easy-to-use USB-to-Serial adapters. Built around the CH340C IC this board upgrades you to the modern USB-C connector effectively future-proofing your toolkit. It works with b

开发板和工具包 - ARM With a 32-bit ARM Cortex-M4F MCU the SparkFun MicroMod SAMD51 Processor Board is one powerful microcontroller packaged on a small board! The board provides you with an economical and easy to use development platform if you're needing more power with

开发板和工具包 - ARM The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connec

安全/认证开发工具 ???? Product Restrictions: To access certain features of the ATECC608A users will need to contact Microchip and sign an NDA contract to obtain the complete datasheet. Due to the required NDA - technical support an Arduino library and hookup guide

多功能传感器开发工具 The MyoWare® 2.0 Muscle Sensor is designed to be wearable allowing you to attach biomedical sensor pads directly to the board itself. However there still may be cases where you want to mount the sensor pads away from the board; this is where th

多功能传感器开发工具 The MyoWare 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your

界面开发工具 The SparkFun USB-C Host Shield contains all of the digital logic and analog circuitry necessary to implement a USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB 2.0 compatibl

教育套件 If you do anything with electronics you re probably already using transistors but you re probably using them in large prepackaged clusters of just one type. The SparkFun Discrete Semiconductor Kit addresses your needs of only needing one or a

教育套件 The great thing about open source is that while SparkFun has designed our own MicroMod carrier boards that does not stop you from creating your very own MicroMod carrier board. The MicroMod DIY Carrier Kit includes five M.2 connectors (4.2mm height)

子卡和OEM板 RS232 Shifter - SMD Shifter - SMD

测试插头和测试插座 This is a black insulated binding post. These binding posts do accept banana plugs and are a great way to connect single-wire leads. The colored cap screws up and down and is designed to clamp on the connecting wire.These binding posts are sold ind