所有结果 (1,921)

SparkFun 配件 Resistor 1M Ohm 1/4 Watt PTH - 20 pk

SparkFun 配件 Tip tinner is a good thing to have in your arsenal of soldering supplies. Composed of a mild acid it helps remove baked on residue (for when you melt your desk top) and helps prevent oxidation (the nasty black stuff) that accumulates on your solderi

SparkFun 配件 This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM317 adjustable regulator contained in a handy surface mount package. Requires two external resistors to

SparkFun 配件 This is a simple knob that connects to the extra large sized linear slide potentiometer. Each knob uses friction to secure itself to fit onto the slide pot. Once attached this small knob provides you with an easier to use potentiometer for your proj

SparkFun 配件 LED - SMD RGB

SparkFun 配件 1.0M Ohm 1/4th Watt +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards. We've opted for a new and more breadboard-friendly lead thickness (they're a bit thicker than our last ones).Note: Sold as singles. But check below fo

SparkFun 配件 USB Type 'A' Female SMD connector. For use with any PCB that will be used with a Type A to Type A USB cable. Designed to mount to the UBW32.Documents:Datasheet

SparkFun 配件 This is the SMD version of PRT-07948 which is the unit we like to use as RTC backup and SRAM backup for GPS units. Holds battery in place with friction. The metal housing connects to the positive side of the battery and the PCB pad underneath is con

SparkFun 配件 This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awhile now but never the female. Now you have the ability to get both!Pins have 0.1" spacing between rows and between pins.Docu

SparkFun 配件 USB C is fantastic. But until we have converted all our hubs chargers and ports over to USB C this is the cable you're going to need. Supporting USB 3.1 speeds and charging up to 3A this 1 meter cable is perfect for high data rate transfers and ch

SparkFun 配件 This is a simple subminiature size axial lead mounted rectifier diode. Often used for reverse voltage protection the 1N4001 is a staple for many power DC to DC step up and breadboard projects. The 1N4001 is rated for up to 1A/50V.

SparkFun 配件 The US1881 is an integrated Hall effect latched sensor. That's nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely but can be limite