Marki Microwave 信号调节

结果: 568
选择 图像 零件编号 制造商 描述 数据表 供货情况 单价(含13%增值税) 根据您的数量,按照单价筛选表格中的结果。 数量 RoHS ECAD模型 产品类型 产品 频率 频率范围 电压额定值 阻抗 端接类型 封装 / 箱体 最小工作温度 最大工作温度
Marki Microwave 信号调节 The MFBP-00137PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00137PSM features a 7.7-12.8GHz 1dBc passband and 1.8dB center frequency insertion loss.

Signal Conditioning
Marki Microwave 信号调节 A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.

Signal Conditioning
Marki Microwave 信号调节 The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
Signal Conditioning
Marki Microwave 信号调节 The ABDS-10170PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. It offers 3 dB differential to single ended gain from low frequencies (limited by DC block) to 30 GHz.

Signal Conditioning
Marki Microwave 信号调节 The ABSD-10168PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 3 dB single ended to differential gain (low end limited by DC block).

Signal Conditioning
Marki Microwave 信号调节 A packaged miniature bias tee featuring excellent 0.4 dB insertion loss and superior 25 dB isolations over a broad 10 MHz to 26 GHz bandwidth. The BTM-0026PSM-1 works well for K-Band applications.

Signal Conditioning
Marki Microwave 信号调节 The DLM-10SM is a tunable, dual channel GaAs Schottky diode signal limiter featuring excellent IP3, insertion loss, and return loss.

Signal Conditioning
Marki Microwave 信号调节 The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.
Signal Conditioning
Marki Microwave 信号调节 The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.
Signal Conditioning
Marki Microwave 信号调节 The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.
Signal Conditioning
Marki Microwave 信号调节 The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.
Signal Conditioning
Marki Microwave 信号调节 The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.
Signal Conditioning
Marki Microwave 信号调节 The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.
Signal Conditioning
Marki Microwave 信号调节 The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.
Signal Conditioning
Marki Microwave 信号调节 The MBAL-0260CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 2 to 60 GHz operational bandwidth.

Signal Conditioning
Marki Microwave 信号调节 MBAL-1445 is a high isolation MMIC balun. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MBAL-1445SM is available as a 4 X 4 mm QFN package.

Signal Conditioning
Marki Microwave 信号调节 The MBALH-0R106CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 35 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R106CSP2, offering flexibility in system design.

Signal Conditioning
Marki Microwave 信号调节 The MDPX-00003PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 4 GHz and high frequency 6 to 28 GHz signals. The MDPX-00003PSM is available as a 4x4mm QFN and connectorized evaluation board.

Signal Conditioning
Marki Microwave 信号调节 The MDPX-00004PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 6 GHz and high frequency 8 to 28 GHz signals. The MDPX-00004PSM is available as a 4x4mm QFN and connectorized evaluation board.

Signal Conditioning
Marki Microwave 信号调节 The MDPX-00005PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 8 GHz and high frequency 10 to 28 GHz signals. The MDPX-00005PSM is available as a 4x4mm QFN and connectorized evaluation board.

Signal Conditioning
Marki Microwave 信号调节 The MDPX-00006PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 10 GHz and high frequency 12 to 28 GHz signals. The MDPX-00006PSM is available as a 4x4mm QFN and connectorized evaluation board.

Signal Conditioning
Marki Microwave 信号调节 The MDPX-00007PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 12 GHz and high frequency 14 to 28 GHz signals.The MDPX-00007PSM is available as a 4x4mm QFN and connectorized evaluation board.

Signal Conditioning
Marki Microwave 信号调节 The MDPX-00008PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 14 GHz and high frequency 16 to 28 GHz signals. The MDPX-00008PSM is available as a 4x4mm QFN and connectorized evaluation board.

Signal Conditioning
Marki Microwave 信号调节 The MDPX-0305PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 3 GHz and high frequency 5 to 26.5 GHz signals.

Signal Conditioning
Marki Microwave 信号调节 The MDPX-0407PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 4 GHz and high frequency 7 to 26.5 GHz signals.

Signal Conditioning