结果: 315
选择 图像 零件编号
 制造商
描述 数据表 供货情况 单价（含13%增值税） 根据您的数量，按照单价筛选表格中的结果。
数量 RoHS ECAD模型 产品类型
产品
频率
频率范围
电压额定值
阻抗
端接类型
封装 / 箱体
最小工作温度
最大工作温度
Marki Microwave 信号调节 A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.
数据表
1预期 2026/10/2
最低： 1
倍数： 1

Signal Conditioning
Marki Microwave 信号调节 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
数据表
1预期 2026/10/8
最低： 1
倍数： 1

Signal Conditioning
Marki Microwave 信号调节 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
数据表
1预期 2026/11/13
最低： 1
倍数： 1

Signal Conditioning
Marki Microwave 信号调节 The CE10-1R540 is a next generation broadband 1.5GHz to 40GHz, 10dB directional coupler from the Marki Elite Series. Conductive paint is applied to all Elite Series products to reduce EMI/RFI leakage and susceptibility.
数据表
无库存交货期 18 周
最低： 1
倍数： 1

Signal Conditioning
Marki Microwave 信号调节 The MM2-0530H is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530H is available as a wire bondable chip or connectorized SMA package.
数据表
无库存交货期 18 周
最低： 1
倍数： 1

Signal Conditioning
Marki Microwave 信号调节 The MMIQ-30120H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 30 to 120 GHz on the RF and LO ports with an IF from DC to 30 GHz.
数据表
无库存交货期 18 周
最低： 1
倍数： 1

Signal Conditioning
Marki Microwave 信号调节 The MMIQ-40100H is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 40 to 100 GHz on the RF and LO ports with an IF from DC to 20 GHz.
数据表
无库存交货期 18 周
最低： 1
倍数： 1
Signal Conditioning
Marki Microwave 信号调节 The MMIQ-40100L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 40 to 100 GHz on the RF and LO ports with an IF from DC to 20 GHz.
数据表
无库存交货期 18 周
最低： 1
倍数： 1
Signal Conditioning
Marki Microwave 信号调节 The CBR16-0006 offers the highest directivity of any standalone 6 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
数据表
更多信息可用

Signal Conditioning
Marki Microwave 信号调节 A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 10 GHz bandwidth.
数据表
更多信息可用

Signal Conditioning
Marki Microwave 信号调节 The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
数据表
更多信息可用
Signal Conditioning
Marki Microwave 信号调节 The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet housing.
数据表

Signal Conditioning
Marki Microwave 信号调节 A broadband MMIC LO buffer amplifier that is capable of producing at least +18 dBm up to 67 GHz. This amplifier can be used to drive L- or H-diode mixers from 35-67 GHz, or L- or H-diode IQ mixers from 35-60 GHz.
数据表

Signal Conditioning
Marki Microwave 信号调节 The ADA-1030 can be used as a frequency extender to enhance the frequency range of a <15 GHz synthesizer up to 30 GHz. Useful for lab testing, test and measurement, and prototype systems.
数据表

Signal Conditioning
Marki Microwave 信号调节 A wideband low noise amplifier capable of providing 24 dB gain and a low 1.3 dB typical noise figure from 6 to 20 GHz. The ADM-8556 is an ideal linear signal amplifier for applications requiring low power consumption and small form-factors.
数据表

Signal Conditioning
Marki Microwave 信号调节 The ADM-8558 is a wideband distributed low noise amplifier capable of providing 16 dB gain and +23 dBm OIP3 from 0.005 to 20 GHz and a low 1.8 dB typical noise figure from 7 to 15 GHz.
数据表

Signal Conditioning
Marki Microwave 信号调节 A high-linearity low noise amplifier capable of providing 15 dB gain, 2.1 dB noise figure and +27 dBm OIP3 from 300 kHz to 10 GHz. It can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
数据表

Signal Conditioning
Marki Microwave 信号调节 A high-linearity, low noise amplifier capable of providing 10.5 dB gain and +26 dBm OIP3 across a broad 0.2-20 GHz bandwidth.
数据表

Signal Conditioning
Marki Microwave 信号调节 The ADM-8625PC is a high-linearity low noise amplifier capable of providing 18 dB gain, 1.4 dB noise figure and +29 dBm OIP3 from 750 MHz to 8 GHz.
数据表

Signal Conditioning
Marki Microwave 信号调节 A high-linearity, high gain, low noise distributed amplifier capable of providing +22dBm output power up to 35 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
数据表

Signal Conditioning
Marki Microwave 信号调节 A high-linearity amplifier capable of providing +18 dBm output power up to 10 GHz. The ADM1-8095PC can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
数据表

Signal Conditioning
Marki Microwave 信号调节 A wideband mmWave amplifier in our M-package enabling operation up to 95 GHz in a connectorized form. This amplifier provides typical +19 dBm output power, 11 dB gain making it suitable for driving mmWave mixers.
数据表

Signal Conditioning
Marki Microwave 信号调节 A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
数据表

Signal Conditioning
Marki Microwave 信号调节 A general-purpose broadband MMIC driver amplifier that provides +21 dBm output power suitable for driving a Marki H or L diode mixer at 11-38 GHz and S diode mixer from 15 32 GHz. The amplifier also has excellent return losses and gain flatness.
数据表

Signal Conditioning
Marki Microwave 信号调节 A general-purpose broadband MMIC driver amplifier that provides +21 dBm output power suitable for driving a Marki H or L diode mixer at 12-46 GHz and S diode mixer from 14-40 GHz.
数据表

Signal Conditioning