工程技术开发工具

开发板和工具包 - ARM The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connec

安全/认证开发工具 ???? Product Restrictions: To access certain features of the ATECC608A users will need to contact Microchip and sign an NDA contract to obtain the complete datasheet. Due to the required NDA - technical support an Arduino library and hookup guide

多功能传感器开发工具 The MyoWare 2.0 Muscle Sensor is designed to be wearable allowing you to attach biomedical sensor pads directly to the board itself. However there still may be cases where you want to mount the sensor pads away from the board; this is where the M

多功能传感器开发工具 The MyoWare 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your

界面开发工具 The SparkFun USB-C Host Shield contains all of the digital logic and analog circuitry necessary to implement a USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB 2.0 compatibl

显示开发工具 The SparkFun Micro OLED Breakout Board breaks out a small monochrome blue-on-black OLED. It s "micro" but it still packs a punch the OLED display is crisp and you can fit a deceivingly large amount of graphics on there. This breakout is perf

显示开发工具 Add a vibrant 16x2 RGB Text on Black Liquid Crystal Display to your custom electronics without the traditional wiring headache. The SparkFun SerLCD streamlines the entire process by mounting an AVR ATmega328P microcontroller directly to the back of

子卡和OEM板 MOSFET Power Controller

光学传感器开发工具 This version of the QRE1113 breakout board features a digital output using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available and can be used in both 3.3

电源管理IC开发工具 Big Easy Driver

电源管理IC开发工具 The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less connections to every feature offered. Use our extensive Arduino Library with 10 examp

压力传感器开发工具 This is a force sensitive resistor with a square 1.75x1.5" sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is bein