SparkFun Electronics 传感器

结果: 174
选择 图像 零件编号 制造商 描述 数据表 供货情况 单价(含13%增值税) 根据您的数量,按照单价筛选表格中的结果。 数量 RoHS
SparkFun 压力传感器开发工具 The SparkFun Qwiic BMP581 Pressure Sensor is a standard-sized 1in. by 1in. absolute pressure sensor breakout from Bosch Sensortec. The BMP581 boasts exceptional resolution (down to 1/64Pa) and accuracy while maintaining on-chip linearization and tem 82库存量
最低: 1
倍数: 1

SparkFun 生物计量传感器 This is a 10 pack of Biomedical Sensor Pads disposable electrodes that can be used to measure EEG ECG and EMG levels. these little pads are perfect for short-term monitoring of Neurofeedback and Biofeedback purposes. They are to be used once and ar 337库存量
最低: 1
倍数: 1
SparkFun 多功能传感器开发工具 The SparkFun Pulse Oximeter and Heart Rate Sensor is an I2C based biometric sensor utilizing two chips from Maxim Integrated: the MAX32664 Biometric Sensor Hub and the MAX30101 Pulse Oximetry and Heart Rate Module. While the latter does all the sens 75库存量
最低: 1
倍数: 1
SparkFun 光学传感器开发工具 Ambient Light Sensor B/O TEMT6000 125库存量
最低: 1
倍数: 1

SparkFun 多功能传感器开发工具 16 Output I/O Expan B/O SX1509 104库存量
最低: 1
倍数: 1

SparkFun 温度传感器开发工具 LilyPad Temperature Sensor 13库存量
最低: 1
倍数: 1

SparkFun 加速传感器开发工具 LilyPad ACCLRM ADXL335 7库存量
最低: 1
倍数: 1

SparkFun 光学传感器开发工具 The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied o 18库存量
最低: 1
倍数: 1

SparkFun 多功能传感器开发工具 The MyoWare® 2.0 Muscle Sensor is designed to be wearable allowing you to attach biomedical sensor pads directly to the board itself. However there still may be cases where you want to mount the sensor pads away from the board; this is where th 35库存量
最低: 1
倍数: 1

SparkFun 多功能传感器开发工具 The MyoWare 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The MyoWare 2.0 Li 13库存量
72预期 2026/9/25
最低: 1
倍数: 1

SparkFun 多功能传感器开发工具 The MyoWare 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would need to do is stack it on your 5库存量
最低: 1
倍数: 1

SparkFun 光学传感器开发工具 This version of the QRE1113 breakout board features a digital output using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available and can be used in both 3.3 34库存量
最低: 1
倍数: 1

SparkFun 板机接口移动感应器和位置传感器 This basic piezo sensor from Measurement Specialties is often used for flex touch vibration and shock measurements. A small AC and large voltage (up to +/-90V) is created when the film moves back and forth. A simple resistor should get the voltage 19库存量
最低: 1
倍数: 1
SparkFun 压力传感器开发工具 This is a force sensitive resistor with a round 0.5" diameter sensing area. This FSR will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force the lower the resistance. When no pressure is b 114库存量
最低: 1
倍数: 1

SparkFun 空气质量传感器 This is a simple-to-use compressed natural gas (CNG) sensor suitable for measuring natural gas (mostly methane [CH4]) concentrations in the air. The MQ-4 can detect natural gas concentrations ranging from 200 to 10000 ppm.This sensor has a high se 23库存量
最低: 1
倍数: 1
SparkFun 温度传感器开发工具 IR Thermometer Eval Board MLX90614 5库存量
最低: 1
倍数: 1

SparkFun 加速传感器开发工具 We've been using and selling Analog Devices' ADXL accelerometers for a good while now and now we've found another great part in the series! The ADXL362 is a complete 3-axis MEMS acceleration measurement system that operates at extremely low power co 34库存量
最低: 1
倍数: 1

SparkFun 多功能传感器开发工具 RedBot Sensor Line Follower 50库存量
最低: 1
倍数: 1

SparkFun 电流传感器开发工具 The INA169 is a high-side current monitor which means that you place a resistor (a shunt resistor ) on the positive power rail and the INA169 measures the voltage drop across that resistor. The INA169 outputs a small current based on the 30库存量
最低: 1
倍数: 1

SparkFun 触摸传感器开发工具 If you need to add user input without using a button then a capacitive touch interface might be the answer. The AT42QT1010 SparkFun Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1010 is 30库存量
45预期 2026/11/12
最低: 1
倍数: 1

SparkFun 光学传感器开发工具 RGB Light Sensor - ISL29125 18库存量
最低: 1
倍数: 1

SparkFun 温度传感器开发工具 TC Breakout - MAX31855K 7库存量
最低: 1
倍数: 1

SparkFun 电流传感器开发工具 Current Sensor Breakout - ACS723 91库存量
最低: 1
倍数: 1
SparkFun 磁传感器开发工具 It's time to start utilizing the superior magnetometer and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor board capable of sensing very small fields 52库存量
最低: 1
倍数: 1

SparkFun 温度传感器开发工具 Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array meaning you have a square array of 64 pixels capable of independent temperature detection. It s like having a thermal cam 14库存量
最低: 1
倍数: 1