SparkFun 工具与耗材

SparkFun 配件 Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device com

SparkFun 配件 This is a 100mm long 4-conductor cable with 1mm JST termination. It s designed to connect Qwiic enabled components together but can be used for other applications as well. The cable insulation is made from a highly malleable material making it more

SparkFun 配件 The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply

SparkFun 配件 This straight bar load cell (sometimes called a strain gauge) can translate up to 10kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of the st

SparkFun 配件 The AT42QT1011 Capacitive Touch Breakout offers a single capacitive touch button with easy-to-use digital I/O pins.The AT42QT1011 is a dedicated, single-button capacitive sense chip. The chip handles monitoring a conductive area for touch.

SparkFun 配件 Always always always wear eye protection while soldering. This is a golden rule we all know but sometimes overlook. Luckily with these SparkFun Safety Glasses you'll have a pair of lightweight economical and stylish lenses to protect your precio

SparkFun 配件 This is a solderer's best helper the third hand. Comes with a heavy base two alligator clips a soldering iron holder and a good magnifying glass. Note that we don't normally need a third hand. It's nice but soldering flat on a table works just f

SparkFun 配件 You can tell by our large assortment of tweezers that we here at SparkFun are way into picking up tiny things. To make sure we're always up to date on the latest in 'tweezing' technology we're always buying and testing new tweezers. Okay... tweezers

SparkFun 配件 Face it if you keep this up your workbench is going to turn into a galaxy of small parts with no place for anything and nothing in its place. Okay so maybe that just happens to some of us but everyone could use a little organization and that's exa

SparkFun 配件 These are nice cross-locking straight tweezers unlike traditional models the tips on these tweezers will remain closed until squeezed open. They have a very fine tip which allows you to pick up very small parts with precision. This is a great tool

SparkFun 配件 A wire stripper is an essential tool for any electronics work bench and this multi-purpose stripper and cutter makes removing protective covers easy. This wire stripper and cutter works with six standard wire sizes from 20 to 30 AWG. It has curved

教育套件 This is a very basic beginner's kit for 8 pin PICAXE microcontrollers. Includes a handful of easy-to-solder through-hole components. Be sure to purchase the 8-pin PICAXE below. A battery snap is provided in this kit but the board must only be drive