工具与耗材

工具与耗材类型

更改类别视图
结果: 12
选择 图像 零件编号 制造商 描述 数据表 供货情况 单价(含13%增值税) 根据您的数量,按照单价筛选表格中的结果。 数量 RoHS
Hirose Connector 其他工具 High Heat and Vibration Resistance, 0.5 SZ, 2mm Pitch, Automotive Interface Connector, TOOL 1库存量
¥4,859.4859
最低: 1
倍数: 1
SparkFun SparkFun 配件 Looking to add MIDI to your project? This is a female 5-pin right-angle DIN 5/180? connector which will interface with most standard MIDI cables. The pins are spaced by just about 0.1" making these connectors easy to prototype with. The contacts 13库存量
50预期 2026/11/20
¥17.3681
最低: 1
倍数: 1
SparkFun SparkFun 配件 This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas. 111库存量
¥47.5617
最低: 1
倍数: 1
SparkFun SparkFun 配件 This is an interface cable for the Bus Pirate designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized as is the mating connector on-board the Bus Pirate so you can only 32库存量
¥47.5617
最低: 1
倍数: 1
Johnson / Cinch Connectivity Solutions 压接器/压接工具 SMP Interface locator tool 无库存交货期 18 周
¥330.9996
¥306.6707
¥290.3535
¥278.5337
最低: 1
倍数: 1
SparkFun SparkFun 配件 Interface Cable N to RP-SMA Cable - 1m 无库存
¥65.7547
最低: 1
倍数: 1
否
Adafruit Adafruit配件 Binho Qwiic / Stemma QT Interface Board 2库存量
¥86.332
最低: 1
倍数: 1
Hirose Connector FI30-20CAT
Hirose Connector 其他工具 1/2 PITCH INTERFACE 20P CONNECTOR
Mouser 目前在您所在地区不销售该产品。
SparkFun SparkFun 配件 The SparkFun HSTX to DVI Breakout takes the 22-pin interface found on the HSTX connector on the RP2350 IoT RedBoard and the display connector on a Raspberry Pi 5 and translates it to an HDMI connector for DVI output.The board includes a 22-pin flex c
Mouser 目前在您所在地区不销售该产品。
否
SparkFun SparkFun 配件 Antenna GPS Embedded SMA 212库存量
¥155.0134
最低: 1
倍数: 1
否
LEMO 压接器/压接工具 Hand crimp tool for LEMO type C 75-Ohm coax contacts with E31 crimp collet 无库存交货期 24 周
¥4,537.967
¥4,327.9452
¥4,256.2354
最低: 1
倍数: 1
SparkFun SparkFun 配件 The SparkFun Qwiic 5V Boost simplifies interfacing 5V I2C devices with the 3.3V Qwiic ecosystem. It takes the 3.3V I2C signals and power from its Qwiic connectors and boosts them to 5V available on the PTH pins. This is perfect for powering peripher
Mouser 目前在您所在地区不销售该产品。
否