SparkFun Electronics SparkFun 配件

SparkFun 配件 Access all the pins (i.e. ATP) of the MicroMod Processor Boards with the SparkFun MicroMod ATP Carrier Board! This board breaks out the MicroMod Processor Board's pins on the M.2 connector to 0.1" spaced female headers and PTH pads on the edge of the

SparkFun 配件 The ANN-MB-00 is a high-performance active GNSS antenna designed to take full advantage of modern multi-band receivers. Unlike standard single-band antennas this unit is tuned to receive both L1 and L2 frequencies across GPS GLONASS Galileo and B

SparkFun 配件 Break Away Headers - Straight

SparkFun 配件 Standard 22 AWG solid Red hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SparkFun 配件 Standard 22 AWG solid Gray hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SparkFun 配件 Screw Terminals 5mm Pitch (2-Pin)

SparkFun 配件 Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.

SparkFun 配件 These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don't always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snugly into most standard perf board

SparkFun 配件 Description: Ever wonder what goes on inside these things? Well this clear bread board might enlighten.Beyond the clear plastic this is really just a regular solderless breadboard. It has 2 power buses 30 columns and 10 rows - a total of 400 tie

SparkFun 配件 This DC power jack/connector is just like the other one that we carry except that it's terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and have a 5.5mm jack with a 2.1mm

SparkFun 配件 Hook-Up Wire Assort. Stranded, 22 AWG

SparkFun 配件 Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have the flexibility of stranded wire but will fit directly onto male pin headers. The only downside to the standard jumper wires