TE Connectivity / DEUTSCH DTM连接器
TE Connectivity (TE) DEUTSCH DTM连接器的接触面很小，基于DEUTSCH DT系列进行了增强设计。DTM连接器设计用于恶劣环境应用，其中可靠的信号电路对工作性能至关重要。该系列连接器的典型应用包括发动机、变速箱上或周围，以及发动机罩下。TE DTM连接器在需要数据信号或关键电子电路的地方提供峰值连接器性能。
特性
- 坚固的热塑性外壳
- 集成锁扣
- -55°C至+125°C工作温度
- 提供2、3、4、6、8和12针位配置
- 硅胶密封，可接受AWG16至AWG24（1.0mm2至0.2mm2）
- 压接端子，可选择用金或镍加工，实心或冲压结构
- 每个端子在+125°C下承载7.5A连续电流
- 可用手插入/拔出端子
- 价格实惠
- 1500V、IP67至IP6K 9K、20G@10Hz至2000HZ
规范
- -55°C to +125°C continuous operating temperatures at rated current
- Durability - no electrical or mechanical defects after 100 cycles of engagement and disengagement
- Vibration - no unlocking or unmating, and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20Gs at 10Hz to
- 2000Hz in each of the three mutually perpendicular planes - no electrical discontinuities longer than 1ms
- Physical shock - no unlocking, unmating, or other unsatisfactory result during or after 50Gs in each of three mutually perpendicular planes - no electrical discontinuities longer than 1ms, MIL-STD 202, Method 213, Condition "C"
- Connectors show no damage when exposed to most fluids used in industrial applications
- 1000MΩ minimum at +25°C insulation resistance
- Moisture resistance - properly wired and mated connections will withstand immersion under three feet of water without loss of electronic qualities or leakage
- >2mA current leakge at 1500VAC dielectric withstanding voltage
- Thermal cycle - no cracking, chipping, or leaking after 20 test cycles from -55°C to +125°C
Dimensions
视频
相关连接器
TE Connectivity / DEUTSCH TE Connectivity / DEUTSCH DT系列连接器
用于线对线应用的环境密封型连接器。
TE Connectivity / DEUTSCH DTM EEC接头
250VDC 最大电压、7.5A额定电流以及-55°C至+125°C工作温度范围。
TE Connectivity 工商业运输
保护重型设备中电气系统不受各种污染物污染的产品。
发布日期: 2015-05-27
| 更新日期: 2026-07-29