MP3363GJ-P

Monolithic Power Systems (MPS)
946-MP3363GJ-P
MP3363GJ-P

制造商：

说明：
LED照明驱动器IC Single String, 1.8V Vin-min, 36V Vout Boost LED Driver

数据表:
ECAD模型:
下载免费库加载程序，将此文件转换，以供您的ECAD工具使用。了解详情。
更多信息
了解Monolithic Power Systems (MPS) MP3363GJ-P详情

库存量: 10

库存：
10
可立即发货
在途量:
1,000
预期 2026/8/3
生产周期：
64
周 大于所示数量的预计工厂生产时间。
本产品所报告的交付时间长。
最少： 1   倍数： 1
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
¥19.5264 ¥19.53
¥14.4753 ¥144.75
¥13.1532 ¥328.83
¥11.8311 ¥1,183.11
¥11.1644 ¥2,791.10
整卷卷轴（请按500的倍数订购）
¥10.17 ¥5,085.00

产品属性 属性值 选择属性
Monolithic Power Systems (MPS)
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Boost
TSOT23-8
36 V
1.8 V
200 kHz to 2.2 MHz
MP3363
- 40 C
+ 125 C
Open/Short LED Protection, Short FB to GND Protection, Thermal Shutdown, Soft Start
Reel
Cut Tape
商标: Monolithic Power Systems (MPS)
开发套件: EV3363-J-00A
调光: Analog, PWM
用于: General Lighting
输入电压: 1.8 V to 36 V
安装风格: SMD/SMT
通道数量: 1 Channel
Pd-功率耗散: 1.25 W
产品: LED Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 500
子类别: Driver ICs
找到的产品:
要显示类似产品，至少选中一个复选框
要显示该类别下的类似产品，请至少选中上方的一个复选框。
已选择的属性: 0

数据表

合规代码
CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99
原产地分类
原产国:
中国
组装原产国/地区:
不可用
扩散国家:
不可用
发货时，国家/地区可能会发生变化。

MP3363 Boost LED Drivers

Monolithic Power Systems (MPS) MP3363 Boost LED Drivers offer an ideal solution for low-current and high-current boost applications. The MP3363 provides a low 0.2V feedback voltage (VFB), allowing higher efficiency in white LED driver applications. The device regulates the output voltage (VOUT) up to 36V, with an efficiency as high as 95%. Additionally, the current mode regulation and external compensation components permit the MP3363 control loop to be optimized across a wide variety of input voltages.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

出现意外错误。


有问题吗？ 请访问帮助中心。
有关特定订单的问题，请登录您的账户。

如果您遇到其他问题，请致电800-346-6873联系我们，或发送电子邮件至 help@mouser.com 。