CD74AC164ME4

Texas Instruments
595-CD74AC164ME4
CD74AC164ME4

制造商:

说明:
计数器移位寄存器 8-Bit Ser-In/Prl-Out Shift Register

寿命周期:
寿命结束:
将过时且制造商将停产。
ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 297

库存:
297 可立即发货
数量大于297的订购须受最低订购要求的限制。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
¥10.0909 ¥10.09
¥7.3902 ¥73.90
¥6.2828 ¥314.14
¥5.7065 ¥570.65
¥5.3336 ¥1,333.40
¥5.1076 ¥2,553.80
¥4.9494 ¥4,949.40
¥4.7234 ¥11,808.50
¥4.6104 ¥23,052.00

类似产品

Texas Instruments CD74AC164M96
Texas Instruments
计数器移位寄存器 8-Bit Ser-In/Prl-Out Shift Register A 59 A 595-CD74AC164M

产品属性 属性值 选择属性
Texas Instruments
产品种类: 计数器移位寄存器
RoHS:  
Serial to Parallel
1 Circuit
8 bit
SOIC-14
AC
CMOS
2
157 ns, 17.5 ns, 12.5 ns
1.5 V
5.5 V
- 55 C
+ 125 C
Tube
商标: Texas Instruments
特点: No Parallel Enable Input
功能: Shift Register
安装风格: SMD/SMT
输出线路数量: 8
工作电源电压: 1.8 V, 2.5 V, 3.3 V, 5 V
产品类型: Counter Shift Registers
复位类型: Asynchronous
系列: CD74AC164
工厂包装数量: 50
子类别: Logic ICs
触发类型: Positive-Edge
单位重量: 129.400 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

                        
The G4 and E4 suffixes were added for ROHS conversion. The
G4 and E4 parts are exactly the same as the original parts
without the G4 or E4 suffix.

For lead-frame-based devices, the RoHS-compliant solution
is backward-compatible with lead-based processes; so the
same part is shipped regardless of whether a unique part
number or a standard part number is ordered.

Lead-frame-based unique part numbers will consist of the
standard part number plus a two-character suffix (usually
E4 or G4, sometimes E3, E6, G3 or G6).

"E" = RoHS-compliant

"G" = Green (RoHS-compliant and no Br/Sb)

Please contact a Mouser Technical Sales Representative for
further information.


5-1011-9

此功能要求启用JavaScript。

合规代码
CNHTS:
8542319090
CAHTS:
8542310000
USHTS:
8542390090
KRHTS:
8542311000
TARIC:
8542319000
MXHTS:
8542310399
ECCN:
EAR99
原产地分类
原产国:
马来西亚
组装原产国/地区:
不可用
扩散国家:
不可用
发货时,国家/地区可能会发生变化。

CD74AC164/CD74ACT164 8位SIPO移位寄存器

Texas Instruments CD74AC164/CD74ACT164 8位SIPO移位寄存器有两个串行输入端(A和B),通过一个与门和一个异步清零(CLR)连接。设备要求A和B上都有高电平信号,才能将输入数据线设置为高电平;其中任何一个低电平信号都会将输入数据线设置为低电平。在CLK为高电平或低电平时,只要满足最短设置时间要求,就可以更改A和B的数据。