DRV8833CPWPR

Texas Instruments
595-DRV8833CPWPR
DRV8833CPWPR

制造商：

说明：
马达/运动/点火控制器和驱动器 Low Vltg Stepper A 5 95-DRV8833CPWP A 595-DRV8833CPWP

数据表:
ECAD模型:
下载免费库加载程序，将此文件转换，以供您的ECAD工具使用。了解详情。
更多信息
了解Texas Instruments DRV8833CPWPR详情

库存量: 2,848

库存：
2,848 可立即发货
生产周期：
12 周 大于所示数量的预计工厂生产时间。
最少： 1   倍数： 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴（请按2000的倍数订购）

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™ †
¥18.0348 ¥18.03
¥13.3227 ¥133.23
¥12.1588 ¥303.97
¥10.9158 ¥1,091.58
¥10.2604 ¥2,565.10
¥9.9214 ¥4,960.70
¥9.5937 ¥9,593.70
整卷卷轴（请按2000的倍数订购）
¥9.1869 ¥18,373.80
¥9.0174 ¥36,069.60
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。 ↩

备用包装

制造商零件编号:
DRV8833CPWP
包装:
Tube
供货情况:
库存量
单价:
¥18.6111
最小:
1

类似产品

Texas Instruments DRV8833CPWP
Texas Instruments
马达/运动/点火控制器和驱动器 Low Vltg Stepper Sng /Dual DC Mtr Drv A 595-DRV8833CPWPR
寿命结束: 将过时且制造商将停产。
与当前部分进行比较

产品属性 属性值 选择属性
Texas Instruments
产品种类: 马达/运动/点火控制器和驱动器
RoHS:  
Stepper Motor Controllers / Drivers
Half Bridge
700 mA
1.7 mA
- 40 C
+ 85 C
SMD/SMT
HTSSOP-16
Reel
Cut Tape
MouseReel
商标: Texas Instruments
湿度敏感性: Yes
产品类型: Motor / Motion / Ignition Controllers & Drivers
系列: DRV8833C
工厂包装数量: 2000
子类别: PMIC - Power Management ICs
电源电压-最大: 10.8 V
电源电压-最小: 2.7 V
单位重量: 85 mg
找到的产品:
要显示类似产品，至少选中一个复选框
要显示该类别下的类似产品，请至少选中上方的一个复选框。
已选择的属性: 0

此功能要求启用JavaScript。

CNHTS:
8542391090
CAHTS:
8542390000
USHTS:
8542310030
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

DRV8833 Dual H-Bridge Motor Drivers

Texas Instruments DRV8833 dual H-bridge motor drivers provide a dual bridge motor driver solution for toys, printers, and other mechatronic applications. The DRV8833 has two H-bridge drivers and can drive two DC brush motors, a bipolar stepper motor, solenoids, or other inductive loads. The out driver block of each H-bridge consists of N-channel power MOSFETs configured as an H-bridge to drive the motor windings. Each H-bridge includes circuitry to regulate or limit the winding current. Texas Instruments DRV8833 dual H-bridge motor drivers are capable of driving up to 1.5A RMS (or DC) continuously at 25ºC with a VM supply of 5V. It can support peak currents of up to 2A per bridge. Current capability is reduced slightly at lower VM voltages.

DRV8833C 双 H-桥电机驱动器

Texas Instruments DRV8833C Dual H-Bridge Motor Drivers provide a dual-bridge motor driver solution for toys, printers, and other mechatronic applications. The device has two H-bridges and can drive two DC brushed motors, a bipolar stepper motor, solenoids, or other inductive loads. Each H-bridge output consists of a pair of N-channel and P-channel MOSFETs, with circuitry that regulates the winding current. With proper PCB design, each H-bridge of the DRV8833C can drive up to 700mA RMS (or DC) continuously, at 25°C with a VM supply of 5V. The device can support peak currents of up to 1A per bridge. Current capability is reduced slightly at lower VM voltages. Internal shutdown functions with a fault output pin are provided for overcurrent protection, short-circuit protection, UVLO, and overtemperature. A low-power sleep mode is also provided.
Learn More

出现意外错误。


有问题吗？ 请访问帮助中心。
有关特定订单的问题，请登录您的账户。

如果您遇到其他问题，请致电800-346-6873联系我们，或发送电子邮件至 help@mouser.com 。