TLV8544PWR

Texas Instruments
595-TLV8544PWR
TLV8544PWR

制造商:

说明:
运算放大器 - 运放 Quad 3.6-V 8-kHz ult ra low quiescent

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 24,852

库存:
24,852 可立即发货
生产周期:
12 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴(请按2000的倍数订购)

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™
¥12.1588 ¥12.16
¥8.9383 ¥89.38
¥8.0456 ¥201.14
¥7.1416 ¥714.16
¥6.7122 ¥1,678.05
¥6.441 ¥3,220.50
¥6.0568 ¥6,056.80
整卷卷轴(请按2000的倍数订购)
¥6.0568 ¥12,113.60
¥5.8308 ¥23,323.20
¥5.7291 ¥45,832.80
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。

产品属性 属性值 选择属性
Texas Instruments
产品种类: 运算放大器 - 运放
RoHS:  
4 Channel
8 kHz
3.5 mV/us
3.4 mV
100 fA
3.6 V
1.7 V
500 nA
30 mA
90 dB
264 nV/sqrt Hz
TSSOP-14
SMD/SMT
No Shutdown
- 40 C
+ 125 C
TLV8544
Reel
Cut Tape
MouseReel
放大器类型: NanoPower Amplifier
商标: Texas Instruments
组装国: Not Available
扩散国家: Not Available
原产国: MY
输入类型: Rail-to-Rail
Ios - 输入偏置电流 : 100 fA
输出类型: Rail-to-Rail
产品: Operational Amplifiers
产品类型: Op Amps - Operational Amplifiers
PSRR - 电源抑制比: 90 dB
工厂包装数量: 2000
子类别: Amplifier ICs
Vcm - 共模电压: 0 V to 3.3 V
单位重量: 173 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

此功能要求启用JavaScript。

CNHTS:
8542339000
CAHTS:
8542330000
USHTS:
8542330001
MXHTS:
8542330201
ECCN:
EAR99

TLV854x超低功率运算放大器

Texas Instruments TLV854x双通道超低功耗运算放大器(运放)旨在用于无线和低功耗有线设备中的成本优化型感测应用。TLV854x可最大限度地降低诸如运行检测安全系统(如微波和PIR运动传感)等运行电池寿命至关重要的设备中的功耗。这些器件还具有精心设计的CMOS输入级,可实现非常低的毫微微安偏置电流,从而降低IBIAS和IOS误差,否则会影响敏感应用。这些应用的示例包括具有兆欧级反馈电阻器的跨阻抗放大器 (TIA) 配置和高源阻抗感测应用。此外,内置的电磁干扰 (EMI) 保护功能可降低器件对手机、WiFi、无线发射器、标签阅读器所发出意外射频信号的灵敏度。

Texas Instruments | Amplifiers & Linear TLV854x Nanopower Operational Amplifiers

Texas Instruments TLV854x Nanopower Operational Amplifiers are intended for cost-optimized sensing applications in wireless and low-power wired equipment. The TLV854x family of op amps minimize power consumption in equipment such as motion detecting security systems (like microwave and PIR motion sensing) where operational battery life is critical. They also have a carefully designed CMOS input stage, enabling very low, femto-ampere bias currents, thereby reducing IBIAS and IOS errors that would otherwise impact sensitive applications. Examples of these applications include transimpedance amplifier (TIA) configurations with megaohm feedback resistors, and high source impedance sensing applications. Additionally, built-in EMI protection reduces sensitivity to unwanted RF signals from sources such as mobile phones, WiFi, radio transmitters and tab readers.