TPS627431YFPT

Texas Instruments
595-TPS627431YFPT
TPS627431YFPT

制造商:

说明:
开关稳压器 2V-5.5V input ultra -low-power 300mA to A 595-TPS627431YFPR

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 1,326

库存:
1,326 可立即发货
生产周期:
6 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴(请按250的倍数订购)

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™
¥15.2211 ¥15.22
¥11.2548 ¥112.55
¥10.17 ¥254.25
¥9.0965 ¥909.65
整卷卷轴(请按250的倍数订购)
¥8.2716 ¥2,067.90
¥8.136 ¥4,068.00
¥7.7744 ¥7,774.40
¥7.6388 ¥19,097.00
¥7.458 ¥37,290.00
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。

备用包装

制造商零件编号:
包装:
Reel, Cut Tape, MouseReel
供货情况:
库存量
单价:
¥12.9046
最小:
1

类似产品

Texas Instruments TPS627431YFPR
Texas Instruments
开关稳压器 2V-5.5V input ultra -low-power 300mA to A 595-TPS627431YFPT

产品属性 属性值 选择属性
Texas Instruments
产品种类: 开关稳压器
RoHS:  
SMD/SMT
DSBGA-8
Buck
3.3 V
400 mA
1 Output
2.15 V
5.5 V
360 nA
1.2 MHz
- 40 C
+ 85 C
TPS62743
Reel
Cut Tape
MouseReel
商标: Texas Instruments
组装国: Not Available
扩散国家: Not Available
原产国: PH
输入电压: 2.15 V
工作电源电流: 300 nA
产品类型: Switching Voltage Regulators
关闭: Shutdown
工厂包装数量: 250
子类别: PMIC - Power Management ICs
电源电压-最小: 2.15 V
类型: High Efficiency Converter
单位重量: 1.400 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

此功能要求启用JavaScript。

CNHTS:
8542319090
CAHTS:
8542390000
USHTS:
8542390070
MXHTS:
8542399901
ECCN:
EAR99

TPS62743 Ultra Low-Power DC-DC Converter

Texas Instruments TPS62743 Ultra-Low-Power DC-DC Converter is a high-efficiency step-down converter with ultra-low quiescent current of typical 360nA. The device is optimized to operate with a 2.2µH inductor and 10µF output capacitor. The device uses DCS-Control™ and operates with a typical switching frequency of 1.2MHz. In Power Save Mode the device extends the light load efficiency down to a load current range of 10µA and below. TPS62743 provides an output current of 300mA. Once started the device operates down to an input voltage range of 2.0V. This allows operating the device directly from a single Li-MnO2 coin cell. The TPS62743 is optimized to provide a low output voltage ripple and low noise using a small output capacitor. Once the input voltage comes close to the output voltage the device enters the No Ripple 100% mode. This is done to prevent an increase of output ripple voltage. In this operation mode, the device stops switching and turns the high side MOSFET switch on.