TPS923650D2DSGR

Texas Instruments
595-TPS923650D2DSGR
TPS923650D2DSGR

制造商:

说明:
LED照明驱动器IC 65V 1A boost or buc k-boost LED driver w

寿命周期:
新产品:
此制造商的新产品。
ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 2,945

库存:
2,945 可立即发货
生产周期:
12 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
¥12.656 ¥12.66
¥7.7292 ¥77.29
¥6.4975 ¥162.44
¥4.9268 ¥492.68
¥4.2601 ¥1,065.03
¥3.729 ¥1,864.50
¥3.3561 ¥3,356.10
整卷卷轴(请按3000的倍数订购)
¥2.8702 ¥8,610.60
¥2.5086 ¥15,051.60

产品属性 属性值 选择属性
Texas Instruments
产品种类: LED照明驱动器IC
RoHS:  
1 Output
Boost, Buck-Boost
1 A
WSON-8
63 V
4.5 V
1 MHz
5.5 V to 65 V
TPS923650
Cycle-by-cycle over-current protection, Fast load transient support, Integrated Switching FET, LED Open Detection, LED Short Detection, Thermal shutdown
Reel
Cut Tape
商标: Texas Instruments
开发套件: TPS923650DRLREVM
调光: Analog
输入电压: 4.5 V to 63 V
安装风格: SMD/SMT
通道数量: 1 Channel
产品: LED Lighting Drivers
产品类型: LED Lighting Drivers
工厂包装数量: 3000
子类别: Driver ICs
电源电流—最大值: 3.5 mA
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

此功能要求启用JavaScript。

CAHTS:
8542310000
USHTS:
8542310030
TARIC:
8542399000
ECCN:
EAR99

TPS92365x升压/降压-升压LED驱动器

Texas Instruments TPS92365x非同步升压/降压-升压LED驱动器具有4.5V至65V的宽输入范围。通过集成低侧NMOS开关,该器件能以高功率密度和高效率驱动LED并为电池充电。这些器件的典型电流限制为1.5A (TPS922650)、3A(TPS922651、TPS922652和TPS922653)和6.5A(TPS922654和TPS922655)。TPS92365x还支持共阳极连接和单层PCB设计。开关频率可在100kHz至2.2MHz范围内配置,具有可选的扩频功能,可实现更好的EMI性能。

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.