所有结果 (579)

信号调节 Factory configured vibration transmitter, IEPE sensor input, 2 x 4-20 mA outputs, supports single and dual output sensors; configuration details: acceleration input, 100 mV/g accelerometer sensitivity, true RMS, velocity output, 2 ips full scale, 10-

加速传感器模块 Side exit, microdot connector, low noise floor, case grounded, 100 mV/g, +/-5% sensitivity tolerance

加速传感器模块 Top exit, low noise, low frequency (0.1 Hz), MIL-C-5015 connector, 500 mV/g, +/-5% sensitivity tolerance

振动传感器 Top exit, 105 C, 4-20 mA ( 5% @ full scale) proportional to Velocity, Equivalent Peak, 0.5 ips (12.7 mm/sec), 1/4-28 mounting hole (stud included), MIL-C-5015 connector.

传感器硬件与配件 Stud, 1/4-28 to 3/8-24

振动传感器 Compact vibration transmitter, 4-20 mA vibration sensor, 105C; 20 g full scale, proportional to acceleration, RMS; top exit 2-pin MIL-C-5015 connector, 1/4-28 mounting hole (stud included)

加速传感器模块 Top exit, general purpose, 100 mV/g, +/-5% sensitivity tolerance, MIL-C-5015 connector, Class I Div 2 certified

传感器电缆/致动器电缆 MIL-C-5015, 2 socket, IP 68, high temperature (200 degrees C), non-isolated, blunt cut, twisted pair, braided shield, yellow, Teflon jacket, 100 ft.

传感器电缆/致动器电缆 J9F twisted pair, foil shield w/ drain wire, high temp 200C, red Teflon jacketed 16 cable with 6W molded

接线盒 2 channel BNC, termination junction box, cable grips

传感器电缆/致动器电缆

加速传感器模块 Top exit, extremely low frequency (0.1 Hz), MIL-C-5015 connector, case isolated, 500 mV/g, +/-5% sensitivity tolerance