电源管理IC开发工具 The SparkFun 1.8V Buck Regulator Breakout features the AP3429A from Diodes Inc. a 2A step-down DC-DC converter with an input voltage range of 2.7V to 5.5V. This full-size 1in. x 1in. version of our buck regulator boards is configured to provide a r

界面开发工具 The SparkFun USB-C Host Shield contains all of the digital logic and analog circuitry necessary to implement a USB peripheral/host controller with your Arduino. This means you could use your Arduino to interface with and control any USB 2.0 compatibl

多协议开发工具 Don't be fooled by its miniature size; the SparkFun Pro Micro ESP32-C3 packs a punch. This micro marvel crams the powerful ESP32-C3 a single-core RISC-V powerhouse with 400KB of SRAM into a compact 1.3in. x 0.7in. board. Clocking in at 160MHz it's

Raspberry Pi HAT/附加板 Ready to get started with Raspberry Pi and Qwiic? The SparkFun Qwiic Starter Kit for Raspberry Pi includes the SparkFun Qwiic pHAT v2.0 for Raspberry Pi which adds four Qwiic connectors to your Pi. It also includes four Qwiic-enabled boards: SparkFu

OLED显示器和配件 The SparkFun Qwiic OLED Display can display up to four lines of text and features 128x32 pixels in a compact 0.91-inch display. (diagonal) frame. As an OLED this display does not have a backlight layer (unlike LCDs); therefore it s thinner consu

电源管理IC开发工具 The SparkFun 3-Phase Brushless Motor Driver featuring the TMC6300 from ADI + Trinamic is a powerful and easy-to-use three-phase motor driver that was designed to control our Brushless Gimbal Motor. It can be used to control any 3-phase BLDC or PMSM

压力传感器开发工具 The SparkFun Qwiic Pressure Sensor features the BMP384 pressure sensor from Bosch Sensortec. The BMP384 excels at high-resolution measurements (up to 24-bit) and uses a gel-filled cavity to provide extra resistance to liquids (water and other chemica

磁传感器开发工具 The SparkFun Qwiic Micro MMC5983MA Magnetometer is a micro-sized 0.75in. by 0.30in. sensor that utilizes the highly sensitive triple-axis magnetometer by MEMSIC. We've attached the magnetometer IC onto an incredibly small Qwiic board form factor tha

加速传感器开发工具 The LIS3DH Breakout is a smart low-power three-axis capacitive micro-machined accelerometer with 12 bits of resolution that you can use to add translation detection to your project. It would be classified as a 3DoF or 3 Degrees of Freedom. Inerti

加速传感器开发工具 The SparkFun Qwiic BMA400 Triple Axis Accelerometer Breakout offers a 3-axis acceleration sensor perfect for ultra-low-power applications on an easy-to-use Qwiic breakout board. Dubbed the first "real" ultra-low power acceleration sensor the BMA400

NFC/RFID开发工具 The SparkFun Qwiic Dynamic NFC/RFID Tag features the ST25DV64KC dynamic Near Frequency Communication (NFC) / Radio Frequency Identification (RFID) tag IC from STMicroelectronics . The ST25DV64KC offers 64-kbit (8-kbytes) of EEPROM memory which can

多功能传感器开发工具 Looking for an extremely accurate way to detect motion utilizing AI? We've got you covered with the Qwiic-enabled SparkFun LSM6DSV16X 6DoF IMU Breakout. The LSM6DSV16X from STMicroelectronics is a high-performance low-power 6-axis IMU featuring