可编程逻辑 IC 开发工具 The Sipeed Tang Primer 25K is a small core board (23x18mm) designed based on a GW5A-LV25MG121 FPGA and accompanied by a 25K Dock base board that exposes all pins (excluding MIPI high-speed pins). The ultra-small core board size can be applied in any

光学传感器模块 The Sensirion Particulate Matter Sensor SPS30 is a compact high quality optical particle sensor that uses laser scattering and Sensirion's innovative contamination resistance technology to achieve superior binning and particle measurement. This sen

相机和相机模块 The OpenMV M7 Camera is a small low-power microcontroller board that allows you to easily implement applications using machine vision in the real world. The best part about the OpenMV is that it is not only capable of image capture but also face de

SparkFun 配件 Huge 10mm through-hole LEDs.Features:515-520nm Green3.0-3.4VDC Forward Voltage80mA Forward Current30 degree viewing angle16 000-22 000 MCD outputDocuments:DatasheetLED Tutorial

SparkFun 配件 It's the end of the world and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED securing nut and a pre-installed long life horizontal microswitch. Button can also be adjusted

SparkFun 配件 This is a perfect choice if you are in need of a heavy duty push button! These metal push buttons are a very tough small panel-mount latching switch with an illuminated green LED ring. It is a SPDT with 16mm threading and 1mm pitch. This button is

SparkFun 配件 The LilyPad E-Sewing ProtoSnap is a great way to explore how buttons and switches behave in simple e-sewing circuits before crafting your project. Like other LilyPad ProtoSnap series boards the individual pieces of the board are pre-wired --- allowi

SparkFun 配件 The factory is currently not accepting orders for this product.

SparkFun 配件 This is the classic Hitec HS-422 servo. This solid consumer grade servo is able to take in 6 volts and deliver 57 oz-in. of maximum torque at 0.16 sec/60 this is a simple servo for any beginner project!This high quality servo is perfect for your m

SparkFun 配件 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide

相机开发工具 The FLIR Lepton Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard power supplies generated from 3

加速计 Triple Axis Accelerometer - ADXL335