TS19503CB10H RBG

Name: Taiwan Semiconductor TS19503CB10H RBG
Brand: Taiwan Semiconductor
SKU: 821-TS19503CB10HRBG
Price: 10.03 RMB
Availability: InStock

图像仅供参考
请参阅产品规格

Mouser编号：

821-TS19503CB10HRBG

制造商编号：

TS19503CB10H RBG

制造商：

Taiwan Semiconductor

说明：

LED照明驱动器IC 2A, Step-Down LED Driver with Integrated N-channel FET High-Side Current Sense

数据表:

TS19503CB10H RBG 数据表

ECAD模型:

下载免费库加载程序，将此文件转换，以供您的ECAD工具使用。了解详情。

更多信息

了解Taiwan Semiconductor TS19503CB10H RBG详情

库存量: 2,443

库存：: 2,443 可立即发货

出现意外错误。请稍候重试。
生产周期：: 16 周大于所示数量的预计工厂生产时间。

数量大于2443的订购须受最低订购要求的限制。

输入数量：

最少： 1 倍数： 1

单价:

¥-.--

总价:

¥-.--

预估关税:

封装:

整卷卷轴（请按5000的倍数订购）

剪切带

MouseReel™ (+¥15.00)

定价 (含13% 增值税)

数量	单价	总价
剪切带/MouseReel™ ^†
	¥11.3339	¥11.33
	¥8.2603	¥82.60
	¥7.4919	¥187.30
	¥6.6444	¥664.44
	¥6.2376	¥1,559.40
	¥6.0003	¥3,000.15
	¥5.5144	¥5,514.40
整卷卷轴（请按5000的倍数订购）
	¥5.3223	¥26,611.50

† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。 ↩

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

产品属性	属性值	选择属性
制造商:	Taiwan Semiconductor
产品种类:	LED照明驱动器IC
RoHS:
输出端数量:	1 Output
拓扑结构:	Buck
输出电流:	2 A
封装 / 箱体:	MSOP-10
电源电压-最大:	75 V
电源电压-最小:	4.5 V
工作频率:	1 MHz
输出电压:	Adjustable
系列:	TS19503
最小工作温度:	- 40 C
最大工作温度:	+ 125 C
特点:	PWM Dimming, Open LED Protection
资格:	AEC-Q101
封装:	Reel
封装:	Cut Tape
封装:	MouseReel
商标:	Taiwan Semiconductor
调光:	Analog, PWM
输入电压:	4.5 V to 75 V
湿度敏感性:	Yes
安装风格:	SMD/SMT
通道数量:	1 Channel
产品:	LED Drivers
产品类型:	LED Lighting Drivers
工厂包装数量:	5000
子类别:	Driver ICs
电源电流—最大值:	1.5 mA
零件号别名:	TS19503CB10H

找到的产品:

要显示类似产品，至少选中一个复选框

要显示该类别下的类似产品，请至少选中上方的一个复选框。

已选择的属性: 0

筛选文档:

数据表

TS19503CB10H RBG 数据表

Models

Specification Sheets

Newsletter (PDF)

Technical Resources

User Manual (PDF)

CNHTS:: 8542399000
USHTS:: 8542390090
TARIC:: 8542399000
ECCN:: EAR99

TS19503CB10H Step-Down LED Driver

Taiwan Semiconductor TS19503CB10H Step-Down LED Driver is a continuous conduction mode inductive step-down converter that is designed to drive single and multiple LEDs. This LED driver provides a high accuracy output current that is externally adjustable up to 2A. The step-down LED driver includes the power switch and a high-side output current sensing circuit that uses an external resistor to set the nominal average output. This device offers an FLT flag when an open load or over-temperature condition is detected. The step-down LED driver provides more than 25 watts of output power and operates from 4.5V to 75V input supply range. This LED driver offers an efficiency of up to 97% and up to 1MHz of switching frequency. The TS19503CB10H LED driver is RoHS compliant and is used in applications such as automotive exterior lighting and LED general lighting.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.