"PI SUPPLY"所有结果 (6,971)

SparkFun 配件 LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very standard yellow LED. The lens is 3mm in diameter and it is diffused.Features:2.0-2.4VDC forward dropMax current

SparkFun 配件 LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a blue lens. It has a typical forward voltage of 3.4V and a rated forward current of 30mA.Fea

SparkFun 配件 The QRE1113 is a small IR reflectance sensor. This sensor is often used in line following robots because if it can sense if a surface is white or black.There are four pins on the QRE1113 - two control the IR emitting LED while the other two are the

压接器/压接工具 PICOFLEX CRIMP TERMI P TERMINAL HAND TOOL

SparkFun 配件 This is a 3-pin through-hole PH series JST connector. The pins are spaced by 2mm.We really like the solid locking feeling and high current rating on these small connectors. This connector mates with our 3-pin jumper wire and may be useful for inter

SparkFun 配件 LEDs - those blinky things. A must have for power indication pin status opto-electronic sensors and fun blinky displays.This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and a rated forward current of 20mA.

SparkFun 配件 Jumper - 2 Pin

SparkFun 配件 We could talk about how the Zinc used in these nuts is only from the finest old-growth Zinc trees from across the globe and is hand picked only at the peak of the season. Or how they are expertly hand-ground by a 6th generation master grinder. And ho

SparkFun 配件 This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don't stack. These are useful for Arduino compatible boards that

SparkFun 配件 This is a 2x40 pin right-angle PTH header. This header can be broken apart with a fair amount of force to form smaller header formations. Don't worry it's easy enough to break it where you need! Each pin has a spacing of 0.1" in between each other.D

印刷电路板和试验板 Chip Scale 56 pin .5mm pitch

SparkFun 配件 The US1881 is an integrated Hall effect latched sensor. That's nice but what does it do? Holding a magnet near the sensor will cause the output pin to toggle. This makes for a robust presence sensor. A reed sensor also works nicely but can be limite