ATSTK600-RC49

Microchip Technology
556-ATSTK600-RC49
ATSTK600-RC49

制造商:

说明:
插座和适配器 STK600 ROUTINGCARD UC3 D4 SERIES

寿命周期:
寿命结束:
将过时且制造商将停产。
ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

供货情况

库存:
无库存
生产周期:
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:

定价 (含13% 增值税)

数量 单价
总价
¥193.7159 ¥193.72

产品属性 属性值 选择属性
Microchip
产品种类: 插座和适配器
Routing Cards
STK600
商标: Microchip Technology
核心: AVR
数据总线宽度: 8 bit
尺寸: 105 mm x 82 mm x 1.6 mm
产品类型: Sockets & Adapters
工厂包装数量: 1
子类别: Embedded Solutions
单位重量: 168.495 g
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8473309000
USHTS:
8473301180
TARIC:
8473302000
MXHTS:
8473300499
ECCN:
EAR99

智能(轻松的嵌入式控制解决方案)

Microchip Technology轻松的嵌入式控制解决方案可让开发人员通过各种可扩展的8位、16位和32位微控制器、数字信号控制器和微处理器,轻松满足现代电子产品不断变化的需求。借助各种灵活的外设和功能,您可以轻松创建差异化应用程序,在竞争中脱颖而出。直观的设计环境和可视化配置工具可以为您提供直接的入门体验,而经过验证的参考设计和经过专业测试的软件库可降低您的设计风险。

AVR® 32-Bit UC3 Microcontrollers

Microchip AVR 32-Bit UC3 Microcontrollers have been expanded to include the L Series which is Microchip's first picoPower® 32-bit microcontroller, and offers a wide range of innovative technical features; the D Series which is an entry-level 32-bit microcontroller that offers designers a rich feature set of devices; and the Audio Series which allows the execution of Microchip licensed Audio firmware IPs. Microchip 32-bit AVR® UC3 takes efficiency to a new level, going beyond high performance and low power consumption. Native fixed point DSP support, dual port SRAM, multi layer data bus, peripheral DMA controller, peripheral event system and intelligent peripherals move performance and power consumption to the next step. The peripheral DMA controller and multi-layer high-speed bus architecture make the UC3 microcontrollers ideal for high throughput applications. Intelligent peripherals and dynamic power control make UC3 devices the obvious choice for portable and battery-powered applications. View the entire .

D系列AT32UC3 AVR 32位MCU

Microchip Technology D系列AT32UC3 AVR 32位MCU是入门级32位微控制器,具有丰富的特性,包括硬件QTouch®电容式触摸接口、全速USB器件、带日历的RTC、10位ADC、USART、SPI、TWI,PWM和I2S。低功耗UC3D内置SleepWalking™技术,支持外设将器件从睡眠模式中唤醒。UC3D内置电容式触摸模块,最多支持25个硬件通道,每个通道均可配置为按钮、滑块和滚轮。胶合逻辑控制器 (GLOC) 包含可连接到GPIO引脚的可编程逻辑和查找表,这样可以减少外部元件的数量。UC3D与UC3B系列引脚兼容。UC3B具有更高的内存密度和USB OTG,可为需要更多功能和更高性能的UC3D客户提供迁移途径。