M132

图像仅供参考
请参阅产品规格

Mouser编号：

170-M132

制造商编号：

M132

制造商：

M5Stack

说明：

接口模块 DinBase is a "5X5cm" series base specially designed for "DinRail" rail fixing.

数据表:

M132 数据表 (PDF)

ECAD模型:

下载免费库加载程序，将此文件转换，以供您的ECAD工具使用。了解详情。

更多信息

了解M5Stack M132详情

发货提醒：

Mouser 目前在您所在地区不销售该产品。

供货情况

库存：: 出现意外错误。请稍候重试。

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

产品属性	属性值	选择属性
制造商:	M5Stack
产品种类:	接口模块
发货限制：	Mouser 目前在您所在地区不销售该产品。
RoHS:
产品:	Interface Modules
类型:	GPIO, UART
通道/端口数量:	2 Port
接口类型:	GPIO, UART
电源电压-最小:	9 V
电源电压-最大:	24 V
商标:	M5Stack
尺寸:	54 mm x 54 mm x 19 mm
产品类型:	Interface Modules
工厂包装数量:	10
子类别:	Embedded Solutions

找到的产品:

要显示类似产品，至少选中一个复选框

要显示该类别下的类似产品，请至少选中上方的一个复选框。

已选择的属性: 0

筛选文档:

数据表

M132 数据表 (PDF)

Test/Quality Data

CAHTS:: 8473309000
USHTS:: 8473305100
JPHTS:: 847330090
MXHTS:: 8473300499
ECCN:: EAR99

M132 DinBase Interface Module

M5Stack M132 DinBase Interface Module is a 5cm x 5cm series base specially designed for "DinRail" rail fixing. This module comes with a built-in 500mAh lithium battery and is suitable for M5Core. The M132 DinBase module offers an onboard power physical switch to shut down external power and battery completely and reserved Port B and Port C interfaces. This module also provides Lego mounting holes on the lower side for easy fixing, and the bottom supports standard 35mm Dinrails. The M132 module features a 1x12P 2.54 interface, a power switch, four plug-in ears, and proto pads reserved on the internal PCB for easy DIY. This module operates at a 9V to 24V supply voltage range and 54mm x 54mm x 19mm dimensions. The M132 module is ideally used in DIY and scenarios where hosts such as M5Core are powered separately.