Banner Engineering R50 Zero-Pressure Accumulation Control Modules
04/16/2026
04/16/2026
Designed for conveyor zone control and features two modes of operation.
Banner Engineering Remote I/O Solutions
05/10/2024
05/10/2024
Optimizes control system performance and simplifies system designs.
Banner Engineering R95C IO-Link Hubs
12/22/2023
12/22/2023
Enables the control and monitoring of discrete and/or analog signals by an IO-Link master.
Banner Engineering R45C Converters
11/10/2023
11/10/2023
Feature Modbus communications and offer 4-pin M12 integral QD.
Banner Engineering S15C Current Transformer to Modbus Converters
11/02/2023
11/02/2023
Convert a high-voltage current input and produce proportional low-voltage and low-current signals.
Banner Engineering R45C 2-Port Modbus to Analog Converters
09/01/2023
09/01/2023
Output an analog value, voltage, or current, as presented to the ModBus register.
Banner Engineering R45C-K IO-Link to Analog Converters
12/01/2022
12/01/2022
Convert IO-link devices to analog converter that outputs an analog value, voltage, or current.
Banner Engineering Snap Signal DXMR90-4K Series IO-Link Controller
09/01/2022
09/01/2022
12VDC to 30VDC supply voltage range, 5mA typical input current, & -40°C to +70°C temperature range.
查看：9 的 1 - 9
DFRobot TEL0190 Pocket-Sized Debugging Workstation
05/06/2026
05/06/2026
Pocket-sized workstation that eliminates the need for multiple dongles and bulky power adapters.
M5Stack Stamp-P4 Interface Module
05/05/2026
05/05/2026
High-performance embedded module based on the ESP32-P4NRW32 chip.
Banner Engineering R50 Zero-Pressure Accumulation Control Modules
04/16/2026
04/16/2026
Designed for conveyor zone control and features two modes of operation.
M5Stack Unit ChainBus Communication Protocol Converters
03/04/2026
03/04/2026
Integrates an STM32G031G8U6 and uses UART daisy-chain communication to enable chained connections.
M5Stack Grove Converter
01/20/2026
01/20/2026
Features two male HY2.0-4P connectors and one female HY2.0-4Pconnector.
Trumeter DIN-Rail Signal Conditioners
01/09/2026
01/09/2026
Designed for precise signal conversion, isolation, and conditioning for industrial applications.
iWave Global FMC+/FMC Add-On Modules for Rapid System Expansion
10/20/2025
10/20/2025
Add-On modules designed for rapid system expansion.
M5Stack Atomic Motion Base v1.2
09/12/2025
09/12/2025
A high-performance servo and DC motor drive base designed for the Atom main control series.
LEM DVL电压传感器
09/10/2025
09/10/2025
Compact and highly accurate voltage sensor range designed for industrial and traction applications.
Weintek iR Series I/O Modules
09/09/2025
09/09/2025
Remote I/O system designed for flexible and scalable industrial automation.
WIZnet W232N Serial-to-Ethernet Module
03/24/2025
03/24/2025
Supports Modbus TCP to Modbus RTU/ASCII protocol conversion and 10/100Mbps Ethernet.
Tripp Lite HDBaseT-USB3 over Cat6A Extender Kit
03/11/2025
03/11/2025
Extends data from USB peripherals, like webcams and data storage, up to 100m via Cat6A cable.
Tripp Lite DisplayPort over Cat6 Extender Kit
03/11/2025
03/11/2025
Extends a 4K signal via Cat6 cable to a DisplayPort monitor up to 70m away.
Tripp Lite B118-00x-8K 2- & 4-Port 8K HDMI Splitters
03/10/2025
03/10/2025
Transmits 8K video and audio from one HDMI source to two or four HDMI displays simultaneously.
StarTech Interface Modules
02/04/2025
02/04/2025
Upgrades or expands network access and connectivity from a single USB Type‑C® or USB-A port.
M5Stack Unit PaHub v2.1 I2C Interface Module
01/13/2025
01/13/2025
Features a built-in PCA9548AP chip to expand a single I2C interface into six channels.
查看：58 的 1 - 25