工具与耗材

SparkFun 配件 The SparkFun H3LIS331DL Triple Axis Accelerometer Breakout is a low-power high-g accelerometer with I2C and SPI interface options. Though not necessarily good at detecting minute changes the H3LIS331DL is great for grueling conditions that normal a

SparkFun 配件 Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in red LED simplifies all of those nasty worries away into an ea

SparkFun 配件 This is an interface cable for the Bus Pirate designed to connect to its 2x5 I/O header. The cable's connector is composed of two rows of five 0.1" spaced pins; it's also polarized as is the mating connector on-board the Bus Pirate so you can only

SparkFun 配件 Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an

SparkFun 配件 SOIC to DIP Adapter - 20-Pin

SparkFun 配件 The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10 A at one measurement per second.The se

其他工具 IMPEDANCE TESTER INT ANCE TESTER INTERFAC

印刷电路板和试验板 RS485 ComBoard Inter PCB Only, All T/H

SparkFun 配件 This is a simple 2x8 male PTH header. This header is that you will find commonly used to interface with a basic 8x2 character LCDs. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet

SparkFun 配件 These are small spring terminals. Open the aperature with the small arm insert the wire release the arm and the wire is held firmly in place. This is a good quick way to to interface to bare wires. Capable of higher current and more resilient than

Adafruit配件 SparkFun Qwiic Multiport (Works with Stemma QT)

Adafruit配件 Binho Feather / Stemma QT Interface Board