Molex EdgeLine®连接器

Molex EdgeLine® 低高度 连接器 支持高达 25 Gbps 的数据传输速率,有适用不同方向及 PCB 厚度 (从 1.57mm 到 3.18mm)的多种型号可选,适用于高速传输和高密度信号 应用。由于该系列的一体式连接器仅在外围设备接口或升级卡 已安装的情况下才需使用,因而具有经济高效的 独特优势。EdgeLine 设有一个订制卡边接口, 便于设计人员指定先接后断顺序, 并缩短残端长度以实现高速通信。EdgeLine 系列连接器 为低至中端电信、 计算和存储应用提供低价、灵活、可扩展的解决方案。

特性

  • High-speed differential contact design
    • Provides excellent signal integrity
  • Multiple PCB thicknesses (1.57mm to 3.18mm)
    • Accommodates a variety of PCB thicknesses on complex product designs
  • Press-fit, compliant-pin terminal design
    • Easy board termination using flat-rock tooling
  • Cost-effective stitched terminal
    • Accommodates various signal and power requirements
  • Common or singulated ground
    • Optimizes connector for power and slow-speed, single-ended signals in addition to high-speed differential circuits
  • Center key available on certain circuit sizes
    • Improves PCB alignment during mating by relaxing board tolerances up to 0.80mm pitch
  • Multiple circuit sizes available
    • Design flexibility for signal and power assignment
  • Low-profile heights
    • Enhanced airflow and thermal management
  • Keying and locking features available (0.80mm pitch CoEdge Connectors only)
    • Secures the connector to the PCB and improves board alignment during mating
  • Secondary locking options available (0.80mm pitch CoEdge Connectors only)
    • Prevents accidental unmating and prevents PCB from backing out of the connector

规范

  • 240VAC to 250VAC voltage range
  • 1A to 30A current range
  • 10mΩ maximum contact resistance
  • 300VAC dielectric withstanding voltage
  • 10MΩ minimum insulation resistance

应用

  • Telecommunications hardware
  • Storage
  • Networking equipment
  • Computing systems
    • PCIe
    • SAS
    • SATA
    • Storage systems
View Results ( 3 ) Page
物料编号 电流额定值 电压额定值 位置数量 安装风格 系列
170673-2278 1.5 A 250 VAC 278 Position Press Fit 170673
170673-1046 1.5 A 250 VAC 46 Position Press Fit 170673
170673-2108 1.5 A 250 VAC 108 Position Press Fit 170673
发布日期: 2013-11-26 | 更新日期: 2022-03-11