Analog Devices Inc. Analog Devices AD9139 16 位数模转换器
Analog Devices AD9139 是一款 16 位、高动态范围数模转换器(DAC),提供达 1600 MSPS 的采样速率,可以产生高达奈奎斯特频率的多载波。AD9139 TxDAC+® 的特性针对宽带通信应用而优化,集成 1 倍和 2 倍插值、基于 DLL 的高速接口、采样错误检测以及奇偶校验。3 线式串行端口接口(SPI)允许对许多内部参数进行编程和回读。满量程输出电流可以在 9 mA 至 33 mA 范围上进行编程。AD9139 适用于宽带通信、发射分集/MIMO、仪器仪表、自动测试设备等。The AD9139 TxDAC+® includes features optimized for wideband communication applications, including 1× and 2× interpolation, a Delay-Locked Loop (DLL) powered high-speed interface, sample error detection, and parity detection. A 3-wire serial port interface provides for the programming/readback of many internal parameters. A full-scale output current can be programmed over a range of 9mA up to 33mA. The AD9139 is ideal for wideband communications, transmit diversity/MIMO, instrumentation, and automated test equipment.
特性
- <2 DAC clock cycles very small inherent latency variation
- Proprietary low spurious and distortion design
- 6-carrier GSM ACLR = 79dBc at 200MHz IF
- SFDR >85dBc (bandwidth = 300MHz) at zero ZIF
- Flexible 16-bit LVDS interface
- Supports word and byte load
- Multiple chip synchronization
- Fixed latency and data generator latency compensation
- Selectable 1× or 2× interpolation filter
- Support input signal bandwidth up to 575MHz
- High performance, low noise PLL clock multiplier
- Digital inverse sinc filter
- 700mW at 1230MSPS Low power
- FIFO eases system timing and includes error detection
应用
- Wireless communications
- 3G/4G and MC-GSM base stations
- Wideband repeaters
- Software-defined radios
- Wideband communications
- Point-to-point
- LMDS/MMDS
- Transmit diversity/MIMO
- Instrumentation
- Automated test equipment
Functional Block Diagram
发布日期: 2014-01-23
| 更新日期: 2022-03-11
