返回NXP Semiconductors

NXP Semiconductors LPC4300 Cortex™-M4 / M-0双核MCU

NXP Semiconductors LPC4300系列微控制器(MCU)拥有全世界首款非对称双核数字信号控制器体系结构，配有ARM® Cortex™-M4和Cortex-M0处理器。这些NXP Cortex-M4 MCU配有Cortex-M0协处理器，优势在于，可在单一体系结构、开发环境中，开发数字信号处理器(DSP)和MCU应用。LPC4300系列Cortex-M4处理器将MCU的优势与诸如单周期MAC、单指令多数据(SIMD)技术、饱和算法和浮点单元的数字信号处理功能相结合。Cortex-M0协处理器卸载很多可消耗Cortex-M4核心带宽的数据运动和I/O处理任务。凭借其双核架构和独特的可配置外设集，NXP Semiconductors LPC4300 MCU可用于开发诸如电机控制、电源管理、工业自动化、机器人技术、医疗设备、汽车配件和嵌入式音频的广泛应用。

The LPC4300 series Cortex-M4 processor combines the benefits of an MCU with high-performance digital signal processing features such as single-cycle MAC, Single Instruction Multiple Data (SIMD) techniques, saturating arithmetic, and a floating-point unit. The Cortex-M0 co-processor off-loads many of the data movement and I/O handling duties that can drain the bandwidth of the Cortex-M4 core. With its dual-core architecture and unique set of configurable peripherals, NXP Semiconductors LPC4300 MCUs enable the development of a wide range of applications, such as motor control, power management, industrial automation, robotics, medical, automotive accessories, and embedded audio.

特性

  • 204MHz, 32-bit ARM Cortex-M4
  • 204MHz, 32-bit ARM Cortex-M0 asymmetrical coprocessor
  • Up to 1MB Flash
  • Up to 282kB SRAM
  • Two High-speed USB 2.0 interfaces
    • On-chip High-speed PHY
  • LCD Interface
  • Ethernet MAC
  • Unique Quad-SPI Flash Interface
  • Unique State Configurable Timer Subsystem
  • Unique Serial GPIO
  • Up to 146 GPIO
  • Pin-compatible with the LPC1800 series
  • 8-channel GPDMA controller
  • Two 8-channel, 400 Ksps 10-bit ADCs, and one 10-bit DAC
  • Motor Control PWM and Quadrature Encoder Interface
  • Four UARTs, smart card interface
  • Two Fast-mode I²C, two I²S, three SSP/SPI
  • Temperature range: -40 to +85ºC

应用

  • Motor control
  • Power management
  • Industrial automation
  • Robotics
  • Medical
  • Automotive accessories
  • Embedded audio

Associated Products

视频

Block Diagram

框图 - NXP Semiconductors LPC4300 Cortex™-M4 / M-0双核MCU

Additional Resources

Related Products

NXP Semiconductors LPC 32位Arm®技术微控制器

可实现高性能应用并为开发人员带来出色体验。

Learn More关于NXP Semiconductors LPC 32位Arm®技术微控制器 View Products与NXP Semiconductors LPC 32位Arm®技术微控制器相关

NXP Semiconductors i.MX-RT1040交叉MCU

设计用于提供高性能和实时处理能力。

Learn More关于NXP Semiconductors i.MX-RT1040交叉MCU View Products与NXP Semiconductors i.MX-RT1040交叉MCU相关

Related Development Tool

NXP Semiconductors i.MX RT1040评估套件

提供了一个平台，用于开发基于Arm Cortex®-M7架构的600MHz i.MX RT1040交叉MCU。

Learn More关于NXP Semiconductors i.MX RT1040评估套件 View Products与NXP Semiconductors i.MX RT1040评估套件相关
View Results ( 48 ) Page
物料编号 数据表 程序存储器大小 数据 RAM 大小 输入/输出端数量 接口类型
LPC4357JBD208K LPC4357JBD208K 数据表 1 MB 136 kB 164 I/O CAN, GPIO, I2C, I2S, SDIO, SPI, UART
LPC4337JBD144E LPC4337JBD144E 数据表 1 MB 136 kB 83 I/O CAN, GPIO, I2C, I2S, SDIO, SPI, UART
LPC4333JET100E LPC4333JET100E 数据表 512 kB 136 kB 49 I/O CAN, GPIO, I2C, I2S, SDIO, SPI, UART
LPC4333FET256,551 LPC4333FET256,551 数据表 512 kB 136 kB 164 I/O CAN, GPIO, I2C, I2S, SDIO, SPI, UART
LPC4330FET256,551 LPC4330FET256,551 数据表 264 kB 164 I/O CAN, I2C, SPI, UART, USB
LPC4367JBD208E LPC4367JBD208E 数据表 1 MB 154 kB 142 I/O CAN, GPIO, I2C, I2S, UART, USART
LPC4322JBD144E LPC4322JBD144E 数据表 512 kB 104 kB 83 I/O CAN, GPIO, I2C, I2S, SDIO, SPI, UART
LPC4310FBD144,551 LPC4310FBD144,551 数据表 168 kB 83 I/O CAN, I2C, SPI, UART, USB
LPC4327JBD144E LPC4327JBD144E 数据表 1 MB 136 kB 83 I/O CAN, GPIO, I2C, I2S, SDIO, SPI, UART
LPC4317JBD144E LPC4317JBD144E 数据表 1 MB 136 kB 83 I/O CAN, GPIO, I2C, I2S, SDIO, SPI, UART
发布日期: 2011-11-28 | 更新日期: 2025-04-06