Renesas Electronics YSDKS128E10开发套件

Renesas Synergy™ YSDKS128E10开发套件可评估S128 MCU组，采用LQFP64封装。该开发套件设计用于供软件和硬件开发人员开发固件、实验及评估S128 MCU的各项特性。YSDKS128E10开发套件采用ARM v6-M架构，设有256KB代码闪存、4KB片上闪存、24KB SRAM以及USB 2.0全速 (USBFS) 模块。

The Renesas Electronics YSDKS128E10 Development Kit features a pre-installed Renesas Synergy S128 Microcontroller in an LQFP64 package.

特性

Renesas Synergy S128 Microcontroller in an LQFP64 package
- Arm® Cortex®-M0+ Core
- Arm v6-M architecture
- Maximum operating frequency: 32 MHz
- Arm Memory Protection Unit (MPU) with 8 regions
- Debug and Trace: DWT, BPU, Core Sight™ MTB-M0+
- Core Sight™ Debug Port: SW-DP
Memory
- 256KB code flash memory
- 4KB on-chip data flash memory (up to 100,000 erase/write cycles)
- 24KB SRAM
Power
- Main power input of 5V to a barrel jack or USB Device input of 5V
- High-efficiency 5V to 3.3V system power DC-DC converter
- Low noise 5V to 3.3V power regulator for MCU analog functions
- Lithium coin cell holder for low-power operations testing
- Several jumper-configurable headers to allow selection of regulated or battery power source, and monitoring of currents and voltages
Connectivity
- USB 2.0 Full-Speed Module (USBFS)
- SPI and I²C interface, 8-pin header
- SEEED Grove I²C interface
CAN transceiver
- Configurable RS232/RS485 port on an industrial-style 3.5 mm screw terminal plug connector
- Digital Addressable Lighting Interface (DALI)
- PMOD 12-pin multi-type expanded interface (firmware configured)
Analog
- Stereo audio output with headphone jack, and single microphone input
- Operational Amplifier (OPAMP) x 4
- Ambient Light and Temperature sensor.
- User-adjustable manual thumb-wheel potentiometer
Human Machine Interface
- Two capacitive touch buttons and one capacitive touch-slider
- General Purpose I/O Ports
- Up to 53 input/output pins
User I/O
- Three user-configurable LEDs (red, yellow, and green)
- Two user-configurable push button switches