Texas Instruments 德州仪器 TPS65982 USB Type-C & 供电 (PD) 控制器

德州仪器 TPS65982 USB Type-C & 供电 (PD) 控制器在 USB Type-C 连接器上提供电缆插头和方向检测。一旦检测到电缆,TPS65982 即使用 USB PD 协议在 CC 线上进行通信。在电缆检测和 USB PD 协商完成时,TPS65982 启用专有的电源路径,并针对内部和(可选)外部多路复用器配置交替模式设置。CC 引脚上的混合信号前端用于显示 Type-C 电源的默认值 500mA、1.5A 或 3A。它可以检测插头动作,并确定 USB Type-C 电缆方向。它还能通过遵守指定的双向标记编码方案(BMC)和物理层(PHY)协议,自动协商 USB PD 协议。

特性

  • USB Power Delivery (PD) controller:
    • Mode configuration for a source (host), sink (device), or source-sink
    • Bi-phase Marked Encoding/Decoding (BMC)
    • Physical Layer (PHY) protocol
    • Policy engine
    • Configurable at boot and host-controlled
  • USB type-c specification compliant:
    • Detect USB cable plug attach
    • Cable orientation and role detection
    • Assign CC and VCONN pins
    • Advertise default, 1.5A or 3A current for 5V USB type-c power
  • Port power switch:
    • 5V, 3A switch to VBUS for type-c power
    • 5V to 20V, 3A bidirectional switch to or from VBUS for USB PD power
    • 5V, 600mA switches for VCONN
    • Overcurrent limiter, the overvoltage protector
    • PD slew rate control and hard reset support
  • Port data multiplexer:
    • USB 2.0 HS data, UART data, and low-speed endpoint
    • Sideband use data for alternate modes (DisplayPort and Thunderbolt)
  • Power management:
    • Gate control and current sense for external 5V to 20V, 5A bidirectional NFET switch
    • Power supply from 3.3V or VBUS source
    • 3.3V LDO output for dead battery support
  • BGA Microstar junior package:
    • 0.5mm pitch
    • Through-hole via compatible for all pins
  • Ul recognized: e169910 and e339631
    • Standards used: 2367
  • IEC certification: no88109
    • Standards used: 60950-1(ed.2);am1;am2

应用

  • Notebook, tablet, and ultrabook computers
  • Docking systems, monitors, and TVS
  • AC-DC charger adapters
  • USB PD sources, sinks, and dual-role ports

Block Diagram

框图 - Texas Instruments 德州仪器 TPS65982 USB Type-C & 供电 (PD) 控制器
发布日期: 2015-10-28 | 更新日期: 2023-07-27