返回Texas Instruments

Texas Instruments TUSB212/Q1 USB 2.0高速信号调节器

Texas Instruments TUSB212/Q1 USB 2.0高速信号调节器设计用于补偿传输通道中的ISI信号损失。该器件采用对低速 (LS) 和全速 (FS) 信号无感知的设计，该设计正在申请专利。LS和FS信号特征不受TUSB212/Q1的影响，但该器件会对HS信号进行补偿。通过可编程的信号交流升压和直流升压来精调器件性能，从而对连接器上的高速信号进行优化，进而有助于通过USB高速电气合规性测试。另外，TUSB212/Q1还符合USB On-The-Go (OTG) 和电池充电 (BC) 协议。

特性

  • Compatible with USB 2.0, OTG 2.0 and BC 1.2
  • Pin strap or I2C configurable
  • Support for LS, FS, and HS signaling
  • Selectable signal gain via daisy chain device for high loss applications
  • Ultra-low USB disconnect and shutdown power consumption
  • Supports up to 5m pre-channel or 2m post-channel cable length
    • Four selectable AC boost settings via external pulldown resistor
    • DC Boost along with AC boost for best signal integrity
  • D1P/M and D2P/M Interchangeable and host/device agnostic

应用

  • Notebooks
  • Desktops
  • Docking stations
  • Tablets
  • Cell phones
  • Active cable, cable extenders
  • Backplane
  • Televisions

Datasheets

Related Product

Texas Instruments TUSB216I USB 2.0高速信号调节器

设计用于补偿传输通道中的交流损耗和直流损耗。

Learn More关于Texas Instruments TUSB216I USB 2.0高速信号调节器 View Products与Texas Instruments TUSB216I USB 2.0高速信号调节器相关

TUSB212EVM Eval Module

Texas Instruments TUSB212EVM USB 2.0 High-Speed Signal Conditioner Evaluation Module is designed to evaluate the TUSB212/Q1. The TUSB212/Q1 is a USB High-Speed signal conditioner, designed to compensate for ISI signal loss in a transmission channel. The Evaluation Module has plug and play design and is configurable through DIP switches. The TUSB212EVM is powered by USB VBUS or 5 to 5.5VDC IN through a power jack J3. The module interface consists of a USB 3.1 Type A Receptacle and a USB 3.1 Type B Receptacle.

发布日期: 2017-11-02 | 更新日期: 2022-07-11