FXLA108BQX

onsemi
512-FXLA108BQX
FXLA108BQX

制造商:

说明:
总线收发器 Dual Supply 8-Bit Voltage Translator

ECAD模型:
下载免费库加载程序,将此文件转换,以供您的ECAD工具使用。了解详情。

库存量: 41,521

库存:
41,521 可立即发货
生产周期:
14 周 大于所示数量的预计工厂生产时间。
最少: 1   倍数: 1
单价:
¥-.--
总价:
¥-.--
预估关税:
封装:
整卷卷轴(请按3000的倍数订购)

定价 (含13% 增值税)

数量 单价
总价
剪切带/MouseReel™
¥6.2828 ¥6.28
¥4.4861 ¥44.86
¥4.0341 ¥100.85
¥3.5369 ¥353.69
¥3.2996 ¥824.90
¥3.164 ¥1,582.00
¥3.1188 ¥3,118.80
整卷卷轴(请按3000的倍数订购)
¥2.8815 ¥8,644.50
¥2.7911 ¥16,746.60
† ¥15.00 MouseReel™费将被加上并在购物车计算。所有MouseReel™订单均不可撤消和退回。

产品属性 属性值 选择属性
onsemi
产品种类: 总线收发器
RoHS:  
3-State
FXL
1 Circuit
8.5 ns
DQFN-20
4 uA
- 4 uA
1.1 V
3.6 V
- 40 C
+ 85 C
Reel
Cut Tape
MouseReel
商标: onsemi
功能: Bus Transceiver with Voltage Translation
安装风格: SMD/SMT
通道数量: 8 Channel
极性: Non-Inverting
产品: CMOS
产品类型: Bus Transceivers
系列: FXLA108
工厂包装数量: 3000
子类别: Logic ICs
电源电流—最大值: 10 uA
单位重量: 123 mg
找到的产品:
要显示类似产品,至少选中一个复选框
要显示该类别下的类似产品,请至少选中上方的一个复选框。
已选择的属性: 0

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

电压电平转换器解决方案

安森美电压电平转换器解决方案可应对AI、机器学习、云计算和高级辅助驾驶系统 (ADAS) 等市场趋势的挑战。这些改进要求实现更快的处理速度、更高的内核或像素数量以及更小的工艺节点,从而降低I2C、SPI、GPIO、UART、PMBus和SMBus等协议的I/O电压。不匹配的I/O电压可能引起高代价糟糕时刻,从而导致通信错误和位故障。在IC之间添加电压转换器可以在低至$0.10解决这些问题,无需昂贵的ASIC或MCU重新设计(成本高达数百万)。

FXLA104 / FXLA108 Automatic Direction Translators

onsemi / Fairchild FXLA108 and FXLA104 are configurable automatic direction dual-voltage supply translators for both uni-directional and bi-directional voltage translation between two logic levels. The devices allow translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The FXLA108 and FXLA104 remain in three-state until both VCCs reach active levels, allowing either VCC to be powered up first. Internal power-down control circuits place the device in 3-state if either VCC is removed. The /OE input, when HIGH, disables both the A and B ports by placing them in a 3-state condition. The /OE input is supplied by VCCA.