SparkFun 配件

SparkFun 配件 If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard you may consider these SIL-packaged resistors as a time-saving alternative. This Singe In-Line component is actually 5 individual 330 Ohm resistors that

SparkFun 配件 These color-changing LEDs take the work out of creating crazy flashy blinky... ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LEDs make great decorations LED "

SparkFun 配件 Do you need that extra push over the cliff? The Small sized GTE (Goes To Eleven) Knob can fit onto potentiometers with a 6mm wide shaft thanks to a brass insert with a set screw. Unfortunately this knob does not play well with 1/4" shafts (nobody li

SparkFun 配件 Amphenol FCI Clinchr Conn. (2 POS, F)

SparkFun 配件 The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows users to switch two AC loads from a low power microcontroller using the SparkFun Qwiic connect system. The board features two 25A/250VAC solid state relays that utilize t

SparkFun 配件 The name says it all on this one. An ATmega328 in DIP package pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.To get t

SparkFun 配件 The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards. Since the Thing Plus and Feather footprints are interchangable you can use this shield w

SparkFun 配件 9V Snap Connector

SparkFun 配件 Standard 22 AWG solid Brown hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of 25'.

SparkFun 配件 If you need to knock up a quick prototype there's nothing like having a pile of jumper wires to speed things up and let's face it: sometimes you want quantity over quality. These are the same jumper wires that come with the SparkFun Inventor's Kit

SparkFun 配件 Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid female connector on either end. They have the flexibility of stranded wire but will fit directly onto male pin headers. The only downside to the standard jumper wires

SparkFun 配件 This is a SMD 4-pin right angle male header. We use this header on our Graphic LCD Serial Backpack.Pins have 0.1" spacing between rows and between pins.Documents:Dimensional Drawing