NXP Semiconductors Kinetis W MCU

飞思卡尔 Kinetis KW2x 无线 MCU 扩展了大获成功的基于 ARM Cortex-M4 CPU 核心的 Kinetis MCU 产品系列。Kinetis KW2x 集成了同类领先的 2.4 GHz RF 收发器、ARM Cortex-M4 核心和一系列强大功能,用于打造可靠、安全、低功耗的 IEEE 802.15.4 无线解决方案。这些无线 MCU 提供多达 512 KB 的闪存、64 KB 的 RAM 及高达 64 KB 的 FlexMemory。双 PAN 支持使系统能同时参与两个 ZigBee 网络,从而无需多个无线电。软件协议栈、工具及 IDE 与 Kinetis MCU 兼容。ZigBee 协议软件与 Kinetis 软件开发工具无缝集成,用以快速创建嵌入式系统。典型应用包括:由电表、网关、家庭内显示器、已连接家电组成的家庭局域网,以及有照明控制、暖通空调及安防功能的网络化楼宇控制和家庭自动化应用等。

特性

  • KW0x Features
    • RF Transceiver
      • Supports 290-340MHz, 424-510MHz, and 862-1020MHz frequency bands
      • High sensitivity: down to -120dBm at 1.2kbps
      • High selectivity: 80dB blocking immunity
      • Low current: Rx = 16mA
      • Programmable output: -18 to +17dBm in 1dB steps
      • FSK bit rates up to 600kbps
      • FSK, GFSK, MSK, GMSK and OOK modulations
      • Packet engine with CRC, AES-128 encryption and 66-byte FIFO
      • Built-in temperature sensor and low battery indicator
    • MCU
      • Ultra-low-power 32-bit ARM® Cortex®-M0+ core. 2x more CoreMark/mA than the closest 8/16-bit architecture. Single-cycle fast I/O access port facilitates bit banging and software protocol emulation, maintaining an 8-bit "look and feel"
      • Multiple, flexible low-power modes including new compute mode which reduces dynamic power by placing peripherals in an asynchronous stop mode
      • I2C, ADC, DAC, LP timer and DMA support low-power mode operation without waking up the core
    • Memory
      • 128 KB flash with 64 byte flash cache
      • 16 KB RAM
    • Peripherals
      • 16-bit ADC with configurable resolution, sample time and conversion speed/power
      • High-speed comparator with internal 6-bit DAC
      • 12-bit DAC with DMA support
    • Interfaces
      • Capacitive touch sense interface supports external electrodes
      • GPIO with pin interrupt support, DMA request capability and other pin control options
      • One I2C with DMA support, up to 100Kbps and compatible with MBus V2 features
      • One LPUART and two UART with DMA support
    • Operating Voltage and Temperature Range
      • 1.8 to 3.6V operating voltage with on-chip voltage regulators
      • Temperature range of -40°C to +85°C
    • Software
      • Radio Test Tool
      • Run on PC connected through USB
      • Allow fast evaluation of the radio performance in a lab environment without need for writing software
      • Analysis of TX spectrum (output power, harmonics)
      • Modulation scheme impact (GFSK, BT, Mod index) on spectrum
      • Help on matching network tuning
      • Analysis of RX Sensitivity performance (RSSI, LNA input impedance, OOK threshold, AFC)
      • SMAC (Simple Media Access Controller)
      • Simple communication and test apps based on drivers/PHY utilities available as source code
      • Small footprint (<10KB)
      • Supports point-to-point and star networks with repeaters
      • Support for over-the-air programming
  • KW2x Features
    • Up to 50MHz Cortex-M4 with 16-channel-DMA
    • 512KB Flash and 64KB RAM or
    • 256KB Flash and 32KB RAM with:
      • 64K FlexNVM (MKW21D256 only) and
      • 4k bytes of enhanced EEPROM/FlexRAM
    • SPI (1)
    • UART (2)
    • I2C (2)
    • USB FS OTG (KW22 and KW24)
    • 8-channel 16-bit SAR ADC
    • 6-bit DA
    • Cryptography Acceleration Unit (CAU)
    • AES encryption (FIPS 140)
    • External tamper detect
    • 32-bit CRC
    • 1.8 to 3.6 volts
    • Low-voltage detection
    • Multiple low power modes
    • Operating temperature of -40°C to 105°C

应用

  • In-home displays
  • Smart thermostat
  • Metering
  • Home energy gateways
  • Security and access control
  • Smart grid and smart metering
  • Building control and monitoring
  • Building HVAC control
  • Retail pricing management
  • Usage data collection
  • Water heater control
  • Home health care
  • Patient monitoring
  • Fitness monitoring

视频

KW0x Block Diagram

框图 - NXP Semiconductors Kinetis W MCU

KW2x Block Diagram

框图 - NXP Semiconductors Kinetis W MCU
发布日期: 2014-01-20 | 更新日期: 2025-06-24